UCC2802DG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 10V |
| Frequency | 1MHz |
| Base Part Number | UCC2802 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 5.075V |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Power Dissipation | 650mW |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 8.3V~12V |
| Control Features | Frequency Control |
| Input Voltage (Min) | 9V |
| Topology | Boost, Flyback, Forward |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 41ns |
| Supply Current-Max (Isup) | 25mA |
| Fall Time (Typ) | 44 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting |
| Max Duty Cycle | 100 % |
| Input Current | 500μA |
| Duty Cycle | 99% |
| Voltage - Start Up | 12.5V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC2802DG4 Overview
8-SOIC (0.154, 3.90mm Width) is the package in which the ac to dc converter is embedded.The AC/DC power converter Tube is available for this product.A AC/DC converter of this type is mounted in the way of Surface Mount .To deliver its performance, the ac dc converter should be operated at a temperature of -40°C~85°C TA .A SWITCHING CONTROLLER analog integrated circuit is used in this AC DC converter.As soon as the switching frequency reaches Up to 1MHz , the circuit is closed.The voltage range of the supply can be set to 8.3V~12V (Vcc/Vdd).There have been 8 terminations of this program.A ac/dc converter with 8 pins is available.There are a total of 8 pins on the ac-dc converter.Surface Mount are the recommended mounting method for the ac dc converters.The UCC2802 family can be used to search for similar acdc converters.There are 1 outputs to be processed.The ac to dc conversions are contained in Switching Regulator or Controllers .AC to DC converter is set to 1A for the output current.It produces a voltage of 5.075V .A high efficiency is achieved when operating at a frequency of 1MHz .Here is the standard for REACH SVHC : No SVHC .It is important to keep this AC to DC converter set to 10V .
UCC2802DG4 Features
Packaged with 8-SOIC (0.154, 3.90mm Width)
Switching Frequency at Up to 1MHz
With 8 pins
Output Current at 1A
UCC2802DG4 Applications
There are a lot of Texas Instruments UCC2802DG4 AC DC Converters applications.
- Low power ac?dc Adapters for Chargers
- Z-Wave
- Linear Adapter Replacements
- Charger
- Standby and Auxiliary Power Supplies Set Top Boxes (STB)
- Off--line Battery Charger
- Cellular phone chargers
- Standby and Auxiliary Power Supplies
- Consumer electronics
- Universal input AC/DC adapters (15W - 45W)
