banner_page

UCC2802N

8 Terminations8.3V~12V 8 Pin UCC2802 AC to DC power converter1 OutputsUp to 1MHz


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-UCC2802N
  • Package: 8-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 844
  • Description: 8 Terminations8.3V~12V 8 Pin UCC2802 AC to DC power converter1 OutputsUp to 1MHz (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 3 days ago)
Mount Through Hole
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm)
Number of Pins 8
Weight 523.190449mg
Operating Temperature -40°C~85°C TA
Packaging Tube
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Switching Regulator or Controllers
Technology BICMOS
Terminal Position DUAL
Number of Functions 1
Supply Voltage 10V
Terminal Pitch 2.54mm
Frequency 1MHz
Base Part Number UCC2802
Pin Count 8
Number of Outputs 1
Output Voltage 1V
Input Voltage-Nom 10V
Analog IC - Other Type SWITCHING CONTROLLER
Nominal Supply Current 500μA
Output Current 1A
Voltage - Supply (Vcc/Vdd) 8.3V~12V
Control Features Frequency Control
Input Voltage (Min) 9V
Topology Boost, Flyback, Forward
Control Mode CURRENT-MODE
Frequency - Switching Up to 1MHz
Control Technique PULSE WIDTH MODULATION
Rise Time 41ns
Supply Current-Max (Isup) 25mA
Fall Time (Typ) 44 ns
Switcher Configuration SINGLE
Internal Switch(s) No
Fault Protection Current Limiting
Max Duty Cycle 100 %
Duty Cycle 99%
Voltage - Start Up 12.5V
Height 5.08mm
Length 9.81mm
Width 6.35mm
Thickness 3.9mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

UCC2802N Overview


In the 8-DIP (0.300, 7.62mm) package, the ac to dc converter is embedded.You can get it in AC/DC power converter Tube .In this case, the AC/DC converter is mounted in the way of Through Hole .It is recommended that the ac dc converter be operated at a temperature of -40°C~85°C TA °C in order to achieve its full performance.In this AC DC converter, an analog integrated circuit (IC) of type SWITCHING CONTROLLER is employed.When the switching frequency reaches Up to 1MHz , the circuit is closed.A range of 8.3V~12V supply voltages (Vcc/Vdd) can be used.A total of 8 terminations have been recorded.In this ac/dc converter, there are 8 pins.There are 8 pins in total.The ac dc converters are suitable for mounting by Through Hole .The UCC2802 family can be used to search for similar acdc converters.There are 1 outputs to be processed.The following ac to dc conversions are contained in Switching Regulator or Controllers .We have set the output current to 1A .Its output voltage amounts to 1V .A high efficiency can be achieved by operating at a frequency of 1MHz .At all times, this AC to DC converter should be set to 10V .

UCC2802N Features


Packaged with 8-DIP (0.300, 7.62mm)
Switching Frequency at Up to 1MHz
With 8 pins
Output Current at 1A

UCC2802N Applications


There are a lot of Texas Instruments UCC2802N AC DC Converters applications.

  • Industrial controls
  • Low power ac?dc Adapters for Chargers
  • LED Driver
  • Adapter/Charger for Cordless Phones
  • Dimmers
  • Cellular phone chargers
  • Set-top boxes
  • AC/DC LED Driver applications
  • SMPS house keeping power supplies
  • AC/DC Adaptors/Chargers for Cell Phones

Write a review

Note: HTML is not translated!
    Bad           Good