UCC2802NG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 523.190449mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 10V |
| Terminal Pitch | 2.54mm |
| Frequency | 1MHz |
| Base Part Number | UCC2802 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 1V |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 8.3V~12V |
| Control Features | Frequency Control |
| Input Voltage (Min) | 9V |
| Topology | Boost, Flyback, Forward |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 41ns |
| Supply Current-Max (Isup) | 25mA |
| Fall Time (Typ) | 44 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting |
| Max Duty Cycle | 100 % |
| Duty Cycle | 99% |
| Voltage - Start Up | 12.5V |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC2802NG4 Overview
An embedded ac to dc converter is included in 8-DIP (0.300, 7.62mm) package.There is a AC/DC power converter of Tube available.There is a AC/DC converter mounted in the way of Through Hole .This ac dc converter should be operated at a temperature of -40°C~85°C TA °C so that it can deliver its performance.Analog ICs of type SWITCHING CONTROLLER are used in this AC DC converter.There is Up to 1MHz switching frequency.The voltage range of the supply can be set to 8.3V~12V (Vcc/Vdd).There have been 8 terminations of this program.It contains 8 pins.The ac-dc converter has 8 pins.There are no problem mounting the ac dc converters by Through Hole .You can search similar acdc converters based on UCC2802 family.Running 1 outputs is available.The following ac to dc conversions are contained in Switching Regulator or Controllers .It has been set to 1A for the output current.The output voltage of the AC/DC converter is 1V .The power AC DC is capable of high efficiency when operated at a frequency of 1MHz .At all times, this AC to DC converter should be set to 10V .
UCC2802NG4 Features
Packaged with 8-DIP (0.300, 7.62mm)
Switching Frequency at Up to 1MHz
With 8 pins
Output Current at 1A
UCC2802NG4 Applications
There are a lot of Texas Instruments UCC2802NG4 AC DC Converters applications.
- Off--line Battery Charger
- Consumer electronics
- Replacements for bulky plug-in transformers
- Standby power supplies for IR
- Home Appliance Applications
- Smartphones
- ZigBee
- AC/DC Adaptors/Chargers for PDAs
- Handheld/Battery-Powered Systems
- Lighting controls
