UCC2802QDRQ1
| Parameters | |
|---|---|
| Input Voltage (Min) | 9V |
| Topology | Boost, Flyback, Forward |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 41ns |
| Fall Time (Typ) | 44 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting |
| Max Duty Cycle | 100 % |
| Duty Cycle | 99% |
| Voltage - Start Up | 12.5V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 75.608178mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Cut Tape (CT) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 10V |
| Frequency | 1MHz |
| Base Part Number | UCC2802 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 1V |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Nominal Supply Current | 500μA |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 8.3V~12V |
| Control Features | Frequency Control |
UCC2802QDRQ1 Overview
In the 8-SOIC (0.154, 3.90mm Width) package, the ac to dc converter is embedded.In Cut Tape (CT) case, the ac dc converter is available.The AC/DC converter is mounted in the way of Surface Mount .For the ac dc converter to perform properly, it should be operated at a temperature of -40°C~125°C TA °C.In this AC DC converter, an analog integrated circuit (IC) of type SWITCHING CONTROLLER is employed.Up to 1MHz is the switching frequency.A range of 8.3V~12V supply voltages (Vcc/Vdd) can be used.It has a total of 8 terminations.A ac/dc converter with 8 pins is available.The pins of the ac-dc converter total to 8 .Surface Mount are the recommended mounting method for the ac dc converters.It belongs to a manufacturer family of Automotive, AEC-Q100 .You can search similar acdc converters based on UCC2802 family.Running 1 outputs is available.Switching Regulator or Controllers includes the ac to dc conversions.We are setting the output current to 200mA .It produces a voltage of 1V .High efficiency can be achieved when AC to DC converters frequency is set to 1MHz .Always keep this AC to DC converter set to 10V .
UCC2802QDRQ1 Features
Packaged with 8-SOIC (0.154, 3.90mm Width)
Switching Frequency at Up to 1MHz
With 8 pins
Output Current at 200mA
UCC2802QDRQ1 Applications
There are a lot of Texas Instruments UCC2802QDRQ1 AC DC Converters applications.
- Air conditioners
- Standby Power Supplies
- Air Conditioning
- Standby Power Supply
- Appliance Power Supplies
- SMPS house keeping power supplies
- Battery Chargers
- Standby power supplies for TV
- Adapters for Handheld Electronics
- Smartphones
