UCC2803N

8 Terminals 3.6V~12V 8-Pin UCC2803 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 31kHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-UCC2803N
Package: 8-DIP (0.300, 7.62mm)
Datasheet: PDF
Stock: 383
Description: 8 Terminals 3.6V~12V 8-Pin UCC2803 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 31kHz Transistor Driver (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Number of Pins	8
Weight	523.190449mg
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Switching Regulator or Controllers
Technology	BICMOS
Terminal Position	DUAL
Supply Voltage	10V
Terminal Pitch	2.54mm
Frequency	1MHz
Base Part Number	UCC2803
Function	Step-Up, Step-Up/Step-Down
Number of Outputs	1
Output Voltage	4.06V
Output Type	Transistor Driver
Input Voltage-Nom	10V
Analog IC - Other Type	SWITCHING CONTROLLER
Nominal Supply Current	500μA
Output Configuration	Positive
Output Current	1A
Voltage - Supply (Vcc/Vdd)	3.6V~12V
Control Features	Frequency Control
Input Voltage (Min)	4V
Topology	Boost, Flyback, Forward Converter
Control Mode	CURRENT-MODE
Frequency - Switching	31kHz
Control Technique	PULSE WIDTH MODULATION
Rise Time	41ns
Supply Current-Max (Isup)	25mA
Synchronous Rectifier	No
Fall Time (Typ)	44 ns
Switcher Configuration	SINGLE
Max Duty Cycle	100 %
Duty Cycle (Max)	99%
Height	5.08mm
Length	9.81mm
Width	6.35mm
Thickness	3.9mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

UCC2803N Overview

It comes in the 8-DIP (0.300, 7.62mm) package, which makes switching controller suitable for most applications. For outputs of 1, this dc motor controller is suitable. There is a Tube solid enclosure around the pmic. With Transistor Driver dc switching's output (s), it is able to handle it. Voltages 3.6V~12V are the dc control's supply voltage and operating voltage, respectively. Suitable for work in a -40°C~85°C TA dc switcher. A switching controller such as this can switch at a value of 31kHz . The Through Hole makes it ideal for general dc dc regulator. The dcdc regulator features Frequency Control for efficient switching control. A SWITCHING CONTROLLER analog IC is connected to the switch converters. Terminal (s) of the switching converters are designed at the DUAL position. A variety of dc switching's functions can be performed on 8 terminations. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 10V. In addition to "UCC2803", there are other relevant dc to dc converter ics you can find. The switching converter has a total of 8 pins. Switching converter type is specifically Switching Regulator or Controllers. The minimum input voltage of the dc dc voltage regulator should be 4V. Test statistics indicate DC regulator outputs 4.06V voltage. In most cases, the dc dc regulator's output current is 1A. This information should be noted when you begin working with the component. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 100 %. DC switcher's Through Hole qualifies it for most applications and prototypes. There is 1MHz frequency setting on the switching controller. There is a requirement for a 10V supply voltage. There should be 25mA more than 25mA amps of current supplied to the controller. The nominal current supply of this the controllers dc is 500μA.