UCC2804D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 10V |
| Frequency | 1MHz |
| Base Part Number | UCC2804 |
| Pin Count | 8 |
| Output Voltage | 5.075V |
| Input Voltage-Nom | 10V |
| Number of Channels | 1 |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Nominal Supply Current | 500μA |
| Power Dissipation | 650mW |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 8.3V~12V |
| Control Features | Frequency Control |
| Input Voltage (Min) | 9V |
| Topology | Boost, Flyback, Forward |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 41ns |
| Supply Current-Max (Isup) | 25mA |
| Fall Time (Typ) | 44 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting |
| Max Duty Cycle | 50 % |
| Input Current | 500μA |
| Duty Cycle | 49% |
| Voltage - Start Up | 12.5V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC2804D Overview
An embedded ac to dc converter is included in 8-SOIC (0.154, 3.90mm Width) package.In Tube case, the ac dc converter is available.In this case, the AC/DC converter is mounted in the way of Surface Mount .The ac dc converter needs to be operated at -40°C~85°C TA °C in order to perform.Analog ICs of type SWITCHING CONTROLLER are used in this AC DC converter.The switching frequency reaches Up to 1MHz .Supply voltage (Vcc/Vdd) does not need to exceed 8.3V~12V .Total terminations are 8 .On this ac/dc converter, there are 8 pins.The pins of the ac-dc converter total to 8 .Surface Mount is the recommended mounting method for the ac dc converters.The UCC2804 family allows you to search for similar acdc converters.The ac to dc conversions are contained in Switching Regulator or Controllers .In this AC to DC transformer, the output current is set to 1A .There is 5.075V output voltage from this AC/DC converter.This power AC DC is capable of reaching high efficiency when operating at a frequency of 1MHz .REACH SVHC standard can be found at No SVHC .Always keep this AC to DC converter set to 10V .Currently, there are 1 channels available.
UCC2804D Features
Packaged with 8-SOIC (0.154, 3.90mm Width)
Switching Frequency at Up to 1MHz
With 8 pins
Output Current at 1A
With 1 channels on it
UCC2804D Applications
There are a lot of Texas Instruments UCC2804D AC DC Converters applications.
- Off--line Battery Charger
- Auxiliary Power Supply
- IoT Applications
- Set-top boxes
- Set -Top Box (STB) Power Supply
- Standby and Auxiliary Power Supplies
- WiFi Wireless
- Standby and Auxiliary Power Supplies Set Top Boxes (STB)
- AC-DC Output Power Conversion Applications
- Set Top Boxes (STB)
