UCC2804DG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 10V |
| Frequency | 1MHz |
| Base Part Number | UCC2804 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 1V |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 8.3V~12V |
| Control Features | Frequency Control |
| Input Voltage (Min) | 9V |
| Topology | Boost, Flyback, Forward |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 41ns |
| Supply Current-Max (Isup) | 30mA |
| Fall Time (Typ) | 44 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting |
| Max Duty Cycle | 50 % |
| Duty Cycle | 49% |
| Voltage - Start Up | 12.5V |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC2804DG4 Overview
This ac to dc converter is embedded in package 8-SOIC (0.154, 3.90mm Width) .The AC/DC power converter type is Tube .Surface Mount is mounted in the way of this AC/DC converter.For the ac dc converter to perform properly, it should be operated at a temperature of -40°C~85°C TA °C.This AC DC converter employs SWITCHING CONTROLLER analog IC type.The switching frequency reaches Up to 1MHz .As long as the supply voltage (Vcc/Vdd) is within the range of 8.3V~12V , the AC/DC converter may be used.It has a total of 8 terminations.On this ac/dc converter, there are 8 pins.There are a total of 8 pins on the ac-dc converter.Surface Mount is the recommended mounting method for the ac dc converters.Search similar acdc converters based on UCC2804 family members.AC to DC converter is necessary to run 1 outputs.The ac to dc conversions are included in Switching Regulator or Controllers .There is 1A output current set.There is 1V voltage output from it.This power AC DC is capable of reaching high efficiency when operating at a frequency of 1MHz .In all situations, this AC to DC converter should be set to 10V .
UCC2804DG4 Features
Packaged with 8-SOIC (0.154, 3.90mm Width)
Switching Frequency at Up to 1MHz
With 8 pins
Output Current at 1A
UCC2804DG4 Applications
There are a lot of Texas Instruments UCC2804DG4 AC DC Converters applications.
- Laptops and personal digital assistants
- Standby power supplies for VCR
- AC--DC Adapter
- Switching AC-DC Adapter
- Battery chargers for mobile devices with touchpad display
- Air conditioners
- Battery Chargers
- Linear Adapter Replacements
- AC/DC LED Driver applications
- Adapters
