UCC2804N
| Parameters | |
|---|---|
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 10V |
| Terminal Pitch | 2.54mm |
| Frequency | 1MHz |
| Base Part Number | UCC2804 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 1V |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Nominal Supply Current | 500μA |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 8.3V~12V |
| Control Features | Frequency Control |
| Input Voltage (Min) | 9V |
| Topology | Boost, Flyback, Forward |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 41ns |
| Supply Current-Max (Isup) | 25mA |
| Fall Time (Typ) | 44 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting |
| Max Duty Cycle | 50 % |
| Duty Cycle | 49% |
| Voltage - Start Up | 12.5V |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 523.190449mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 1W |
| Technology | BICMOS |
UCC2804N Overview
8-DIP (0.300, 7.62mm) is the package in which the ac to dc converter is embedded.In Tube AC/DC power converter, it is available.There is a AC/DC converter mounted in the way of Through Hole .For the ac dc converter to perform at its best, it should be operated at a temperature of -40°C~85°C TA °C.SWITCHING CONTROLLER analog ICs are employed in this AC DC converter.As soon as the switching frequency reaches Up to 1MHz , the circuit is closed.This AC/DC converter is designed for use within the range of 8.3V~12V supply voltage (Vcc/Vdd).It has a total of 8 terminations.It contains 8 pins.The pins of the ac-dc converter total to 8 .The ac dc converters are suitable to mount by Through Hole .Based on the UCC2804 family, you can search for similar acdc converters.There are 1 outputs to be run.There are a ac to dc conversions included in Switching Regulator or Controllers .In this AC to DC transformer, the output current is set to 1A .As a result, its output voltage is 1V .When operating at a frequency of 1MHz , AC to DC converter is capable of reaching high efficiency.You may read the REACH SVHC standard at No SVHC .It is imperative that this AC to DC converter is set to 10V at all times.
UCC2804N Features
Packaged with 8-DIP (0.300, 7.62mm)
Switching Frequency at Up to 1MHz
With 8 pins
Output Current at 1A
UCC2804N Applications
There are a lot of Texas Instruments UCC2804N AC DC Converters applications.
- Adapter/Charger for Cordless Phones
- Open Frame Switching Power Supply
- Set-top boxes
- Battery chargers for smart phones
- ATX/BTX Auxiliary Power
- Power adapters for monitors
- Universal input AC/DC adapters (15W - 45W)
- Linear Adapter Replacements
- USB-PD 2.0
- RCC SMPS
