UCC2804QDREP
| Parameters | |
|---|---|
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 10V |
| Frequency | 1MHz |
| Base Part Number | UCC2804 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 1V |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Nominal Supply Current | 500μA |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 8.3V~12V |
| Control Features | Frequency Control |
| Input Voltage (Min) | 9V |
| Topology | Boost, Flyback, Forward |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 41ns |
| Supply Current-Max (Isup) | 30mA |
| Fall Time (Typ) | 44 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting |
| Max Duty Cycle | 50 % |
| Duty Cycle | 49% |
| Voltage - Start Up | 12.5V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 75.608178mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
UCC2804QDREP Overview
There is a ac to dc converter embedded in package 8-SOIC (0.154, 3.90mm Width) .It is available in Tape & Reel (TR) AC/DC power converter.It is mounted in the way of Surface Mount .For the ac dc converter to perform at its best, it should be operated at a temperature of -40°C~125°C TA °C.Analog ICs of type SWITCHING CONTROLLER are used in this AC DC converter.At this point, the switching frequency reaches Up to 1MHz .A range of 8.3V~12V supply voltages (Vcc/Vdd) can be used.In total, there are 8 terminations.A ac/dc converter with 8 pins is available.There are 8 pins in total.The ac dc converters are suitable for mounting by Surface Mount .The UCC2804 family can be used to search for similar acdc converters.The number of outputs to run is 1 .The ac to dc conversions are included in Switching Regulator or Controllers .200mA is set as the output current.The output voltage of the AC/DC converter is 1V .The power AC DC is capable of high efficiency when operated at a frequency of 1MHz .It is important to keep this AC to DC converter set to 10V .
UCC2804QDREP Features
Packaged with 8-SOIC (0.154, 3.90mm Width)
Switching Frequency at Up to 1MHz
With 8 pins
Output Current at 200mA
UCC2804QDREP Applications
There are a lot of Texas Instruments UCC2804QDREP AC DC Converters applications.
- Records
- Adapter/Charger for Cordless Phones
- AC/DC Adaptors/Chargers for Cell Phones
- Vacuum Cleaner
- Appliances
- AC-DC Output Power Conversion Applications
- Set-top boxes
- Remotely-controlled appliances
- Universal input AC/DC adapters (15W - 45W)
- Power tools
