UCC2805DG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 10V |
| Frequency | 1MHz |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 4V |
| Input Voltage-Nom | 10V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Current - Output | 1A |
| Frequency (Max) | 1MHz |
| Voltage - Output | 1V |
| Input Voltage (Min) | 4V |
| Topology | Boost, Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 41ns |
| Supply Current-Max (Isup) | 30mA |
| Fall Time (Typ) | 44 ns |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 50 % |
| Duty Cycle (Max) | 50 % |
| Height | 1.58mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
UCC2805DG4 Overview
Capsuled in the SOIC package, the switching controller can be used for a wide range of applications. There is sufficient capacity to generate switching controller for outputs 1. Switching can be done at 1MHz with this switching controller. SWITCHING CONTROLLER analog IC connects the switch converters. A switching converters's terminal (s) sits at the DUAL position. An array of 8 terminations of dc switching. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 10V. Total pins of switching converter are 8. Switching converter is a type of Switching Regulator or Controllers in particular. The minimum input voltage of the dc dc voltage regulator should be 4V. Statistically, the DC regulator outputs 4V voltage. Voltage regulator dc to dc is designed to operate at 50 % duty cycle during power-ups and power-downs to ensure reliability. The Surface Mount makes DC switcher suitable for most applications and prototypes. The switching controller works at a frequency of 1MHz. Keep dc regulator at a temperature of -40°C or above. There should be 85°C temperature above 85°C degrees Celsius when dc regulator runs. 1 functions are available in total for the switch converters. It is planned to design voltage regulators switchings with 8 pins. At maximum frequency, the controller can switch at 1MHz. Inputs of 1A are ideal for this component. This algorithm outputs a value of 1V in normaloperation. A supply voltage of 10V is required. It is important that the controller is supplied with 30mA more than 30mA volts of current. According to its maximum supply voltage rating, the voltage controller is rated 12V.
UCC2805DG4 Features
Switching Frequency: 1MHz
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
UCC2805DG4 Applications
There are a lot of Texas Instruments UCC2805DG4 DC to DC converter applications.
- Smoke prevention equipment
- Hydraulic presses
- Experimental setup
- Radio equipment
- Magnetohydrodynamic power
- Household control circuits
- Nuclear power plants
- Industrial robots
- Laboratories
- Thermal power
