UCC2805N

8 Terminals 3.6V~12V 8-Pin UCC2805 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 31kHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-UCC2805N
Package: 8-DIP (0.300, 7.62mm)
Datasheet: -
Stock: 748
Description: 8 Terminals 3.6V~12V 8-Pin UCC2805 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 31kHz Transistor Driver (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 2 days ago)
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Number of Pins	8
Weight	523.190449mg
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Termination	Through Hole
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Switching Regulator or Controllers
Max Power Dissipation	1W
Technology	BICMOS
Terminal Position	DUAL
Supply Voltage	10V
Terminal Pitch	2.54mm
Frequency	1MHz
Base Part Number	UCC2805
Function	Step-Up, Step-Up/Step-Down
Number of Outputs	1
Output Voltage	1V
Output Type	Transistor Driver
Max Output Current	1A
Input Voltage-Nom	10V
Analog IC - Other Type	SWITCHING CONTROLLER
Nominal Supply Current	500μA
Output Configuration	Positive
Power Dissipation	1W
Output Current	1A
Voltage - Supply (Vcc/Vdd)	3.6V~12V
Control Features	Frequency Control
Topology	Boost, Flyback, Forward Converter
Control Mode	CURRENT-MODE
Frequency - Switching	31kHz
Max Input Voltage	12V
Control Technique	PULSE WIDTH MODULATION
Rise Time	41ns
Supply Current-Max (Isup)	25mA
Synchronous Rectifier	No
Fall Time (Typ)	44 ns
Switcher Configuration	SINGLE
Max Duty Cycle	50 %
Input Current	500μA
Duty Cycle (Max)	49%
Height	5.08mm
Length	9.81mm
Width	6.35mm
Thickness	3.9mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

UCC2805N Overview

Capsuled in the 8-DIP (0.300, 7.62mm) package, the switching controller suits most application needs. 1 outputs are supported by the dc motor controller. Packaging for the pmic consists of Tube solid enclosures. Transistor Driver dc switching's outputs (s) can be handled by it. DC control operates at 3.6V~12V volts and has 3.6V~12V supply voltage. Worked in a -40°C~85°C TA dc switcher before. With this switching controller, you can switch at 31kHz. dc dc regulators can be carried out with Through Hole. Featured in the dcdc regulator is Frequency Control which allows efficient switching control. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. A switching converters's terminal (s) sits at the DUAL position. A variety of dc switching's functions can be performed on 8 terminations. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 10V. You can find other relevant dc to dc converter ics by searching "UCC2805". Switching converter has a total of 8 pins. In particular, switching converter belongs to the Switching Regulator or Controllers family. Statistically, DC regulator outputs 1V volts. A starting point for a project is to note down the dc dc regulator's usual output current, which is 1A. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 50 %. In most applications and prototype designs, DC switcher is qualified as a Through Hole. Switching controller operates at 1MHz Hz. The maximum input voltage of dc switcher is 12V, so users should limit their voltage accordingly. Voltage 10V must be supplied. Output current will not exceed 1A. It is important that the controller is supplied with 25mA more than 25mA volts of current. nominal current supply for this the controllers dc is 500μA. An input of 500μA current flow could satisfy the operation of the switching converter .