UCC2805PW

8 Terminals 3.6V~12V 8-Pin UCC2805 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 31kHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-UCC2805PW
Package: 8-TSSOP (0.173, 4.40mm Width)
Datasheet: -
Stock: 820
Description: 8 Terminals 3.6V~12V 8-Pin UCC2805 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 31kHz Transistor Driver (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP (0.173, 4.40mm Width)
Number of Pins	8
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Switching Regulator or Controllers
Technology	BICMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Supply Voltage	10V
Terminal Pitch	0.65mm
Frequency	1MHz
Base Part Number	UCC2805
Function	Step-Up, Step-Up/Step-Down
Number of Outputs	1
Output Voltage	1V
Output Type	Transistor Driver
Input Voltage-Nom	10V
Analog IC - Other Type	SWITCHING CONTROLLER
Nominal Supply Current	500μA
Output Configuration	Positive
Output Current	1A
Voltage - Supply (Vcc/Vdd)	3.6V~12V
Control Features	Frequency Control
Input Voltage (Min)	4V
Topology	Boost, Flyback, Forward Converter
Control Mode	CURRENT-MODE
Frequency - Switching	31kHz
Control Technique	PULSE WIDTH MODULATION
Rise Time	41ns
Supply Current-Max (Isup)	25mA
Synchronous Rectifier	No
Fall Time (Typ)	44 ns
Switcher Configuration	SINGLE
Max Duty Cycle	50 %
Duty Cycle (Max)	49%
Height	1.2mm
Length	3mm
Width	4.4mm
Thickness	1mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

UCC2805PW Overview

It comes in a 8-TSSOP (0.173, 4.40mm Width) package, so switching controller can be used for most applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. The pmic is packaged in Tube solid enclosure. It is capable of handling Transistor Driver dc switching's outputs (s). This dc control has a supply voltage and operating voltage of 3.6V~12V. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. With this switching controller, you can switch at 31kHz. Surface Mount makes it suitable for general dc dc regulator. Frequency Control is used for efficient switching control in the dcdc regulator. A SWITCHING CONTROLLER analog IC is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. A variety of dc switching's functions can be performed on 8 terminations. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 10V is input. Other relevant dc to dc converter ics can be found by searching "UCC2805". There are a total of 8 pins on switching converter. Particularly, switching converter is a type of Switching Regulator or Controllers. Input voltage of dc dc voltage regulator must be 4V. DC regulator outputs 1V voltage according to the test statistics. You should note that the dc dc regulator's usual output current is 1A. voltage regulator dc to dcs with a 50 % duty cycle are designed to be reliable when powered on and powered off. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sSwitching controllers operate at 1MHz frequencies. The supply voltage must be 10V. A controller's current should not exceed 25mA. This the controllers dc has a nominal current supply of 500μA.