UCC2806DWG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Weight | 473.692182mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 1MHz |
| Base Part Number | UCC2806 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 11.9V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 8V~14.5V |
| Control Features | Current Limit, Enable, Frequency Control |
| Topology | Boost, Flyback, Forward Converter |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 47kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 35ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 35 ns |
| Nominal Input Voltage | 14.5V |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 50 % |
| Input Current | 1mA |
| Clock Sync | No |
| Output Phases | 1 |
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC2806DWG4 Overview
As a result of 16-SOIC (0.295, 7.50mm Width) compact design, the switching controller is compatible with most applications. 2 outputs can be generated with the dc motor controller. An enclosure of Tube is used to package the PMIC. It is capable of handling Transistor Driver dc switching's outputs (s). The supply and operating voltage of the dc control are 8V~14.5V. Worked in an dc switcher with a -40°C~85°C TA rating. The switching controller is capable of switching at the 47kHz position. dc dc regulator is made easier with Surface Mount. Current Limit, Enable, Frequency Control provides dcdc regulator efficient switching control. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. Terminal (s) of the switching converters are designed at the DUAL position. 16 terminations with various dc switching's functions. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 12V. Searching "UCC2806" will return other relevant dc to dc converter ics. Switching converter has a total of 16 pins. The type is a particular Switching Regulator or Controllers of switching converter. According to the test statistics, DC regulator outputs 11.9V voltage. You should note that the dc dc regulator's usual output current is 100mA. The maximum duty cycle of this voltage regulator dc to dc is set to 50 % to ensure reliability during power-up and power-down. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. 1MHz is the frequency of the switching controller. Input voltage can be set to 14.5V for nominal working status. The switching converter could be operated with an input of 1mA current flow.
UCC2806DWG4 Features
Transistor Driver Outputs
Switching Frequency: 47kHz
Current Limit, Enable, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
UCC2806DWG4 Applications
There are a lot of Texas Instruments UCC2806DWG4 DC to DC converter applications.
- Various precision measuring detectors
- Computer-related products
- Injection molding machinery
- Grinders
- Handheld GPS
- Printing equipment
- PSRR circuits
- Shearing machines
- Power supplies of electronic gadgets
- Fire elevators
