UCC2806DWTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Weight | 473.692182mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 1MHz |
| Base Part Number | UCC2806 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 11.9V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 8V~14.5V |
| Control Features | Current Limit, Enable, Frequency Control |
| Topology | Boost, Flyback, Forward Converter |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 47kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 35ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 35 ns |
| Nominal Input Voltage | 14.5V |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 50 % |
| Clock Sync | No |
| Output Phases | 1 |
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC2806DWTR Overview
As a result of 16-SOIC (0.295, 7.50mm Width) compact design, the switching controller is compatible with most applications. For outputs of 2, this dc motor controller is suitable. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. It is capable of handling Transistor Driver dc switching's outputs (s). A 8V~14.5V voltage is supplied to the dc control and used for operating it. Suitable for work in a -40°C~85°C TA dc switcher. Using this switching controller, it is possible to switch at 47kHz. dc dc regulator can be generalized using Surface Mount. To ensure efficient switching, this dcdc regulator features a Current Limit, Enable, Frequency Control. The switch converters are connected to a SWITCHING CONTROLLER analog IC. A switching converters's terminal (s) sits at the DUAL position. Different dc switching's functions can be applied to 16 terminations. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. DC switcher's input voltageis 12V volts. Search for "UCC2806" to find other relevant dc to dc converter ics. Pins number 16 of switching converter in total. Switching converter type is specifically Switching Regulator or Controllers. Based on the test statistics, DC regulator outputs voltage 11.9V. In most cases, the output current of the dc dc regulator will be 100mA, so note that when you start the project. Voltage regulator dc to dc is designed to operate at 50 % duty cycle during power-ups and power-downs to ensure reliability. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. Switching controller operates at 1MHz Hz. You can set the input voltage to 14.5V for nominal working status.
UCC2806DWTR Features
Transistor Driver Outputs
Switching Frequency: 47kHz
Current Limit, Enable, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
UCC2806DWTR Applications
There are a lot of Texas Instruments UCC2806DWTR DC to DC converter applications.
- Product testing
- Computer application technology
- Medical equipment
- Computer-related products
- Game consoles
- Electric water heaters
- Industrial robots
- Wind power
- Experimental setup
- Smart grid
