UCC2806DWTRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Weight | 473.692182mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 1MHz |
| Base Part Number | UCC2806 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 11.9V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 8V~14.5V |
| Control Features | Current Limit, Enable, Frequency Control |
| Topology | Boost, Flyback, Forward Converter |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 47kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 35ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 35 ns |
| Nominal Input Voltage | 14.5V |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 50 % |
| Clock Sync | No |
| Output Phases | 1 |
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC2806DWTRG4 Overview
The switching controller fits in the 16-SOIC (0.295, 7.50mm Width) package and is ideal for most applications. It is sufficient to generate 2 outputs with this dc motor controller. A solid enclosure of Tape & Reel (TR) surrounds pmic. There are Transistor Driver dc switching's output (s) that it can handle. 8V~14.5V is the operating voltage and supply voltage of the dc control. Worked in a -40°C~85°C TA dc switcher before. With this switching controller, you can switch at 47kHz. dc dc regulators can be carried out with Surface Mount. For efficient switching control, the dcdc regulator features Current Limit, Enable, Frequency Control. An analog IC SWITCHING CONTROLLER is connected to the switch converters. Terminal (s) of the switching converters are designed at the DUAL position. An array of 16 terminations of dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. DC switcher's input voltageis set to 12V. Other relevant dc to dc converter ics can be found by searching "UCC2806". Pins number 16 of switching converter in total. Switching converter type is specifically Switching Regulator or Controllers. Statistically, the DC regulator outputs 11.9V voltage. If you are starting a new project, you should note the dc dc regulator's typical output current is 100mA. A duty cycle set at 50 % ensures voltage regulator dc to dc reliability during power-on and power-off. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. Switching controller operates at 1MHz Hz. For nominal working status, the input voltage can be set as 14.5V.
UCC2806DWTRG4 Features
Transistor Driver Outputs
Switching Frequency: 47kHz
Current Limit, Enable, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
UCC2806DWTRG4 Applications
There are a lot of Texas Instruments UCC2806DWTRG4 DC to DC converter applications.
- Hydrogen power
- Precision electronic equipment
- Nuclear power plants
- Correction machines
- seismic instrument power circuits
- Milling machines
- Window air conditioners
- Pipe bending machines
- Packaging
- Surface processing equipment
