UCC2806N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 1.053808g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Frequency | 1MHz |
| Base Part Number | UCC2806 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 11.9V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 8V~14.5V |
| Control Features | Current Limit, Enable, Frequency Control |
| Topology | Boost, Flyback, Forward Converter |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 47kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 35ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 35 ns |
| Nominal Input Voltage | 14.5V |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 50 % |
| Clock Sync | No |
| Output Phases | 1 |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC2806N Overview
In the 16-DIP (0.300, 7.62mm) package, the switching controller meets most application requirements. dc motor controller is suitable for 2 output generation. Packaging for the pmic consists of Tube solid enclosures. With Transistor Driver dc switching's output (s), it is able to handle it. dc control's supply and operating voltages are 8V~14.5V. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. A switching controller such as this can switch at a value of 47kHz . dc dc regulator is made easier with Through Hole. Current Limit, Enable, Frequency Control provides dcdc regulator efficient switching control. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. DUAL are the position of the terminal of the switching converters. There are many different types of terminations for 16. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. 12V nominal DC switcher's voltage input. You can find other relevant dc to dc converter ics by searching "UCC2806". In total, switching converter has 16 pins. In particular, switching converter is a type of Switching Regulator or Controllers. A 11.9V voltage of DC regulator was detected in the test statistics. If you are starting a new project, you should note the dc dc regulator's typical output current is 100mA. A duty cycle set at 50 % ensures voltage regulator dc to dc reliability during power-on and power-off. As DC switcher has a Through Hole, it's suitable for most applications and prototype designs. There is 1MHz frequency setting on the switching controller. 14.5V is the nominal working voltage.
UCC2806N Features
Transistor Driver Outputs
Switching Frequency: 47kHz
Current Limit, Enable, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
UCC2806N Applications
There are a lot of Texas Instruments UCC2806N DC to DC converter applications.
- Hydro power
- Experimental setup
- Shearing machines
- Surface processing equipment
- Electric heating, lighting
- Gear/thread machining machines
- Motor controller circuits
- Sensitive electronic devices
- Medical equipment
- Automatic plug-in machines
