UCC2806PWTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 1MHz |
| Base Part Number | UCC2806 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 11.9V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 8V~14.5V |
| Control Features | Current Limit, Enable, Frequency Control |
| Topology | Boost, Flyback, Forward Converter |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 47kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 35ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 35 ns |
| Nominal Input Voltage | 14.5V |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 50 % |
| Clock Sync | No |
| Output Phases | 1 |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC2806PWTR Overview
This switching controller fits most application requirements since it is packaged in a 16-TSSOP (0.173, 4.40mm Width) package. This dc motor controller can be used to generate outputs with 2 numbers. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. With Transistor Driver dc switching's output (s), it is able to handle it. This dc control operates at 8V~14.5V and has a 8V~14.5V supply voltage. Qualified to work in an dc switcher with -40°C~85°C TA. There is a switch at 47kHz that can be used with this controller. The Surface Mount allows it to be used for dc dc regulator in general. Featured in the dcdc regulator is Current Limit, Enable, Frequency Control which allows efficient switching control. The switch converters are connected to a SWITCHING CONTROLLER analog IC. Switching converters are designed with the terminal (s) at position DUAL . 16 terminations with various dc switching's functions. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. 12V nominal DC switcher's voltage input. In addition to "UCC2806", there are other relevant dc to dc converter ics you can find. 16 pins are present on switching converter. Switching converter type is specifically Switching Regulator or Controllers. The test statistics indicate that DC regulator outputs a voltage of 11.9V. The dc dc regulator's usual output current is 100mA, which should be noted down when you start a project. A duty cycle set at 50 % ensures voltage regulator dc to dc reliability during power-on and power-off. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. Switching controller operates at a frequency of 1MHz. For nominal working status, the input voltage can be set as 14.5V.
UCC2806PWTR Features
Transistor Driver Outputs
Switching Frequency: 47kHz
Current Limit, Enable, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
UCC2806PWTR Applications
There are a lot of Texas Instruments UCC2806PWTR DC to DC converter applications.
- Radio equipment
- Sensitive electronic devices
- Terrestrial set-top boxes
- Energy management systems
- Program control systems
- Packaging
- Production lines
- Constant current circuits
- Electrical distribution systems
- Flaw detection equipment
