UCC2806PWTRG4
| Parameters | |
|---|---|
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 1MHz |
| Base Part Number | UCC2806 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 11.9V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 8V~14.5V |
| Control Features | Current Limit, Enable, Frequency Control |
| Topology | Boost, Flyback, Forward Converter |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 47kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 35ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 35 ns |
| Nominal Input Voltage | 14.5V |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 50 % |
| Clock Sync | No |
| Output Phases | 1 |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
UCC2806PWTRG4 Overview
The switching controller fits in the 16-TSSOP (0.173, 4.40mm Width) package and is ideal for most applications. There is sufficient capacity to generate switching controller for outputs 2. Tape & Reel (TR) solid enclosure protects the pmic. It is capable of handling Transistor Driver dc switching's outputs (s). dc controls with 8V~14.5V voltage are supplied and operated. Suitable for working in an dc switcher that has a -40°C~85°C TA. The switching controller can be switched at 47kHz. A generalization of dc dc regulator can be made using Surface Mount. Featured in the dcdc regulator is Current Limit, Enable, Frequency Control which allows efficient switching control. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. Thare switching converters has a terminal (s) at DUAL . Different dc switching's functions can be applied to 16 terminations. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 12V. A search for "UCC2806" will reveal other relevant dc to dc converter ics. There are a total of 16 pins on switching converter. Switching converter type is specifically Switching Regulator or Controllers. A 11.9V voltage of DC regulator was detected in the test statistics. It's important to remember that the dc dc regulator's normaloutput current is 100mA, so you should note it down when starting a new project. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 50 %. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. There is 1MHz frequency setting on the switching controller. A nominal working status is achieved when the input voltage is set to 14.5V.
UCC2806PWTRG4 Features
Transistor Driver Outputs
Switching Frequency: 47kHz
Current Limit, Enable, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
UCC2806PWTRG4 Applications
There are a lot of Texas Instruments UCC2806PWTRG4 DC to DC converter applications.
- Serial communication converter
- Flexible manufacturing cells
- Electric water heaters
- Drilling machines
- Power supplies of electronic gadgets
- Digital display device
- Product burn-in
- Large fire protection systems
- Grinders
- Machining centers
