UCC2806Q
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 1MHz |
| Base Part Number | UCC2806 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 11.9V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 8V~14.5V |
| Control Features | Current Limit, Enable, Frequency Control |
| Topology | Boost, Flyback, Forward Converter |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 47kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 35ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 35 ns |
| Nominal Input Voltage | 14.5V |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 50 % |
| Clock Sync | No |
| Output Phases | 1 |
| Height Seated (Max) | 4.57mm |
| Length | 8.965mm |
| Width | 8.965mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC2806Q Overview
Capsuled in the 20-LCC (J-Lead) package, the switching controller can be used for a wide range of applications. This dc motor controller can be used to generate outputs with 2 numbers. Packaged in solid enclosures, this pmic has a Tube rating. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sdc controls with 8V~14.5V voltage are supplied and operated. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. This switching controller can switch at 47kHz. It is suitable for general dc dc regulator when it is set to Surface Mount. Current Limit, Enable, Frequency Control is used for efficient switching control in the dcdc regulator. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. A switching converters's terminal (s) sits at the QUAD position. There are many different types of terminations for 20. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. DC switcher's voltage input is 12V. In addition to "UCC2806", there are other relevant dc to dc converter ics you can find. There are 20 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. DC regulator outputs 11.9V voltage according to the test statistics. You should note that the dc dc regulator's usual output current is 100mA. Voltage regulator dc to dc is designed to operate at 50 % duty cycle during power-ups and power-downs to ensure reliability. The Surface Mount makes DC switcher suitable for most applications and prototypes. Switching controllers work at 1MHz Hz. A nominal working status is achieved when the input voltage is set to 14.5V.
UCC2806Q Features
Transistor Driver Outputs
Switching Frequency: 47kHz
Current Limit, Enable, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
UCC2806Q Applications
There are a lot of Texas Instruments UCC2806Q DC to DC converter applications.
- Motor controller circuits
- Hydraulic presses
- Communication system
- Printing
- Packaging
- Servo drive system
- Medical monitoring systems
- CNC system
- Boring machines
- PSRR circuits
