UCC2806QG3
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 1MHz |
| Base Part Number | UCC2806 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 11.9V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 8V~14.5V |
| Control Features | Current Limit, Enable, Frequency Control |
| Topology | Boost, Flyback, Forward Converter |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 47kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 35ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 35 ns |
| Nominal Input Voltage | 14.5V |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 50 % |
| Clock Sync | No |
| Output Phases | 1 |
| Height Seated (Max) | 4.57mm |
| Length | 8.965mm |
| Width | 8.965mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC2806QG3 Overview
As a result of 20-LCC (J-Lead) compact design, the switching controller is compatible with most applications. There is sufficient capacity to generate switching controller for outputs 2. Tube is the solid enclosure in which PMIC is packaged. It is capable of handling Transistor Driver dc switching's outputs (s). This dc control operates at 8V~14.5V and has a 8V~14.5V supply voltage. Worked in a -40°C~85°C TA dc switcher before. In this switching controller, the switch can be set to 47kHz. The Surface Mount makes it ideal for general dc dc regulator. To ensure efficient switching, this dcdc regulator features a Current Limit, Enable, Frequency Control. An analog IC SWITCHING CONTROLLER is connected to the switch converters. There are a QUAD terminal on the switching converters. Different dc switching's functions can be applied to 20 terminations. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. A DC switcher's nominal voltage of 12V is input. Other relevant dc to dc converter ics can be found by searching "UCC2806". In total, switching converter has 20 pins. Specially, switching converter corresponds to type Switching Regulator or Controllers. DC regulator outputs 11.9V voltage according to the test statistics. You should note that the dc dc regulator's usual output current is 100mA. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 50 %. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. The switching controller works at a frequency of 1MHz. 14.5V is the nominal working voltage.
UCC2806QG3 Features
Transistor Driver Outputs
Switching Frequency: 47kHz
Current Limit, Enable, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
UCC2806QG3 Applications
There are a lot of Texas Instruments UCC2806QG3 DC to DC converter applications.
- Elevator lighting
- Telecommunications equipment
- Surface processing equipment
- Printing equipment
- Refrigerators of central air conditioners
- Planers
- Smoke prevention equipment
- Hydro power
- Hydraulic presses
- Magnetohydrodynamic power
