UCC28070PWG4
| Parameters | |
|---|---|
| Package / Case | TSSOP |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Pin Count | 20 |
| Input Voltage-Nom | 12V |
| Power Supplies | 12V |
| Temperature Grade | AUTOMOTIVE |
| Max Supply Voltage | 21V |
| Min Supply Voltage | 10.8V |
| Analog IC - Other Type | POWER FACTOR CONTROLLER |
| Power Dissipation-Max | 800mW |
| Max Supply Current | 20mA |
| Input Voltage (Min) | 10.5V |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.75A |
| Frequency - Switching | 300kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | BOOST |
| Height | 1.15mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
UCC28070PWG4 Overview
The package is TSSOP-shaped.There are other IC types in this part, such as POWER FACTOR CONTROLLER.There are a number of 20 terminals on the gadget.There is no change to the pin number of the component.Switching frequency 300kHz is what determines the switching frequency.20 pins form a sum.It can function with a minimum input voltage of 10.5V.In a way, it can be considered as a subclass of Switching Regulator or Controllers.In terms of output current, it works at the maximum in 0.75AThere is always a 12V-volt supply powering the component.There is no maximum supply temperature that it can work with, but it should not go below 20mA.A device that uses 12V as a supply has the following characteristics.It should be warmer than -40°C?when operating.This is the maximum operating temperature.It can only work with a 21V supply voltage.10.8V volts is the only voltage that it can work with.
UCC28070PWG4 Features
UCC28070PWG4 Applications
There are a lot of Texas Instruments UCC28070PWG4 PFC PMICs applications.
- SoC
- Personal communication device
- Noise filters
- SMPS (Switching-Mode Power Supply)
- Vibration sensor
- Car wiper
- Low Noise Instrumentation
- Main inverter
- Car eCall
- Gateway module
