UCC2807DTR-2
| Parameters | |
|---|---|
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 10V |
| Frequency | 1MHz |
| Base Part Number | UCC2807 |
| Number of Outputs | 1 |
| Output Voltage | 400mV |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 8.3V~13.5V |
| Input Voltage (Min) | 9V |
| Topology | Boost, Flyback, Forward |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 20ns |
| Fall Time (Typ) | 20 ns |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting |
| Max Duty Cycle | 78 % |
| Duty Cycle | 78% |
| Output Isolation | Isolated |
| Voltage - Start Up | 12.5V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
UCC2807DTR-2 Overview
This ac to dc converter is embedded in package 8-SOIC (0.154, 3.90mm Width) .There is a AC/DC power converter of Tape & Reel (TR) available.A AC/DC converter of this type is mounted in the way of Surface Mount .It is recommended that the ac dc converter be operated at a temperature of -55°C~150°C TJ in order to ensure its performance.In this AC DC converter, the analog IC type is SWITCHING CONTROLLER .Within the range of 8.3V~13.5V supply voltage (Vcc/Vdd), it can be used.In total, there are 8 terminations.Approximately 8 pins are present on the ac/dc converter.Surface Mount are the recommended mounting method for the ac dc converters.A similar acdc converter can be searched by using the UCC2807 family.There are 1 outputs to be run.The ac to dc conversions are included in Switching Regulator or Controllers .The output current is set to 100mA .There is 400mV voltage output from it.As long as AC to DC converter is operated at frequency 1MHz ,it is capable of attaining high efficiency.It is important to keep this AC to DC converter set to 10V .
UCC2807DTR-2 Features
Packaged with 8-SOIC (0.154, 3.90mm Width)
With 8 pins
Output Current at 100mA
UCC2807DTR-2 Applications
There are a lot of Texas Instruments UCC2807DTR-2 AC DC Converters applications.
- Power Adaptors
- Adapters
- Air Conditioning
- USB-PD 2.0
- SMPS house keeping power supplies
- Standby power
- Battery chargers for mobile devices with touchpad display
- Switching AC-DC Adapter
- AC-DC Output Power Conversion Applications
- Wall switches
