UCC2807DTR-3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 10V |
| Frequency | 1MHz |
| Base Part Number | UCC2807 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 400mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 4.1V~13.5V |
| Input Voltage (Min) | 4.3V |
| Topology | Boost, Flyback, Forward Converter |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 202kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 20ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 20 ns |
| Max Duty Cycle | 78 % |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC2807DTR-3 Overview
The switching controller fits in the 8-SOIC (0.154, 3.90mm Width) package and is ideal for most applications. It is sufficient to generate 1 outputs with this dc motor controller. PMIC is packaged in a solid enclosure of Tape & Reel (TR). The program can handle Transistor Driver dc switching's outputs (s). This dc control operates at 4.1V~13.5V and has a 4.1V~13.5V supply voltage. Worked in a -40°C~85°C TA dc switcher before. Switching can be done at 202kHz with this switching controller. Surface Mount makes it suitable for general dc dc regulator. The switch converters are connected to a SWITCHING CONTROLLER analog IC. The switching converters's terminal (s) are designed at DUAL . A variety of terminations with 8 of dc switching. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 10V. You can find other relevant dc to dc converter ics by searching "UCC2807". Total pins of switching converter are 8. Specially, switching converter corresponds to type Switching Regulator or Controllers. It is recommended to use 4.3V as the minimum input voltage of dc dc voltage regulator. Statistically, DC regulator outputs 400mV volts. In most cases, the output current of the dc dc regulator will be 100mA, so note that when you start the project. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 78 %. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. There is 1MHz frequency setting on the switching controller. Switching controller is necessary to provide a voltage of 10V.
UCC2807DTR-3 Features
Transistor Driver Outputs
Switching Frequency: 202kHz
PULSE WIDTH MODULATION
Max Duty Cycle: 78 %
Frequency: 1MHz
UCC2807DTR-3 Applications
There are a lot of Texas Instruments UCC2807DTR-3 DC to DC converter applications.
- Special machining machine tools
- USB circuits
- Correction machines
- Large fire protection systems
- Automation technology
- Current source circuits
- Flaw detection equipment
- Plate bending machines
- Program control systems
- Product testing
