UCC2807N-2
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 523.190449mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 1MHz |
| Base Part Number | UCC2807 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 400mV |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 8.3V~13.5V |
| Input Voltage (Min) | 9V |
| Topology | Boost, Flyback, Forward |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 20ns |
| Fall Time (Typ) | 20 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting |
| Max Duty Cycle | 78 % |
| Duty Cycle | 78% |
| Output Isolation | Isolated |
| Voltage - Start Up | 12.5V |
| Height Seated (Max) | 5.33mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC2807N-2 Overview
It is embedded in package 8-DIP (0.300, 7.62mm) .You can get it in AC/DC power converter Tube .Through Hole mounts this AC/DC converter.This ac dc converter should be operated at a temperature of -55°C~150°C TJ °C so that it can deliver its performance.The AC DC converter utilizes a type SWITCHING CONTROLLER analog IC.A range of 8.3V~13.5V supply voltages (Vcc/Vdd) can be used.As a result, it has a total of 8 terminations.A ac/dc converter with 8 pins is available.There are a total of 8 pins on the ac-dc converter.Through Hole is a suitable mounting point for the ac dc converters.The UCC2807 family allows you to search for similar acdc converters.There are 1 outputs to be run.Switching Regulator or Controllers contains the ac to dc conversions.We are setting the output current to 100mA .Its output voltage amounts to 400mV .A high efficiency is achieved when operating at a frequency of 1MHz .
UCC2807N-2 Features
Packaged with 8-DIP (0.300, 7.62mm)
With 8 pins
Output Current at 100mA
UCC2807N-2 Applications
There are a lot of Texas Instruments UCC2807N-2 AC DC Converters applications.
- Standby Power for General Off-Line Applications
- Wireless System
- Open Frame Switching Power Supply
- RCC SMPS
- Power Adaptors
- White goods
- Low power ac?dc Adapters for Chargers
- PDAs
- Set -Top Box (STB) Power Supply
- Standby power supplies for VCR
