UCC28083D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 650mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Frequency | 1MHz |
| Base Part Number | UCC28083 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 1V |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 8.3V~15V |
| Control Features | Frequency Control |
| Input Voltage (Min) | 9.3V |
| Topology | Push-Pull |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 50kHz~1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 25ns |
| Fall Time (Typ) | 25 ns |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting |
| Max Duty Cycle | 50 % |
| Duty Cycle | 49% |
| Output Isolation | Isolated |
| Voltage - Start Up | 12.5V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC28083D Overview
An embedded ac to dc converter is included in 8-SOIC (0.154, 3.90mm Width) package.Tube case is available for the ac dc converter.It is mounted in the way of Surface Mount .For the ac dc converter to perform properly, it should be operated at a temperature of -40°C~85°C TA °C.The AC DC converter uses a type SWITCHING CONTROLLER analog integrated circuit.50kHz~1MHz is the switching frequency.The AC/DC converter is capable of being used when the supply voltage is 8.3V~15V (Vcc/Vdd).There have been 8 terminations of this program.Approximately 8 pins are present on the ac/dc converter.The pins of the ac-dc converter total to 8 .If you select the UCC28083 family, you will be able to search similar acdc converters.The number of outputs to run is 2 .The ac to dc conversions are contained in Switching Regulator or Controllers .Currently, the output current is set to 1A .There is 1V voltage output from it.The power AC DC is capable of high efficiency when operated at a frequency of 1MHz .You can read the standard for REACH SVHC at: No SVHC .
UCC28083D Features
Packaged with 8-SOIC (0.154, 3.90mm Width)
Switching Frequency at 50kHz~1MHz
With 8 pins
Output Current at 1A
UCC28083D Applications
There are a lot of Texas Instruments UCC28083D AC DC Converters applications.
- Air conditioners
- 3.3V power supplies
- Standby power supplies for IR
- Battery Chargers
- Replaces linear transformers
- AC?DC USB chargers for Cameras
- Standby power
- LED lights
- Power adapters for monitors
- Smartphones
