UCC28084D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 650mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 200kHz |
| Base Part Number | UCC28084 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 500mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 20mA |
| Voltage - Supply (Vcc/Vdd) | 4.1V~15V |
| Control Features | Current Limit, Frequency Control |
| Topology | Half-Bridge, Push-Pull |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 25ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 25 ns |
| Nominal Input Voltage | 15V |
| Max Duty Cycle | 50 % |
| Duty Cycle (Max) | 49% |
| Clock Sync | No |
| Output Phases | 1 |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC28084D Overview
It comes in the 8-SOIC (0.154, 3.90mm Width) package, which makes switching controller suitable for most applications. This dc motor controller can be used to generate outputs with 2 numbers. An enclosure of Tube is used to package the PMIC. Transistor Driver dc switching's outputs (s) are supported. This dc control operates at 4.1V~15V and has a 4.1V~15V supply voltage. Work well in dc switchers with a -40°C~85°C TA. Surface Mount makes it suitable for general dc dc regulator. Current Limit, Frequency Control provides dcdc regulator efficient switching control. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. Switching converters are designed with the terminal (s) at position DUAL . There are many different types of terminations for 8. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. There is a DC switcher's nominal voltage of 10V. Other relevant dc to dc converter ics will be returned if you search "UCC28084". There are only 8 pins on switching converter. Switching converter is a type of Switching Regulator or Controllers in particular. Test statistics indicate DC regulator outputs 500mV voltage. In most cases, the output current of the dc dc regulator will be 20mA, so note that when you start the project. The duty cycle of the voltage regulator dc to dc can be set to 50 % on power-up or power-down to ensure reliability. The switching controller works at a frequency of 200kHz. 15V is the nominal working voltage.
UCC28084D Features
Transistor Driver Outputs
Current Limit, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 200kHz
UCC28084D Applications
There are a lot of Texas Instruments UCC28084D DC to DC converter applications.
- Computer-related products
- Imported equipment
- Post equipment
- Energy management systems
- Shearing machines
- Nuclear power plants
- Current source circuits
- Cutting machine tools
- Constant current circuits
- Industrial controllers
