UCC28084PWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Frequency | 1MHz |
| Base Part Number | UCC28084 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 500mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 4.1V~15V |
| Control Features | Current Limit, Frequency Control |
| Input Voltage (Min) | 4.3V |
| Topology | Half-Bridge, Push-Pull |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 25ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 25 ns |
| Max Duty Cycle | 50 % |
| Duty Cycle (Max) | 49% |
| Clock Sync | No |
| Output Phases | 1 |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC28084PWR Overview
Capsuled in the 8-TSSOP (0.173, 4.40mm Width) package, the switching controller can be used for a wide range of applications. It is sufficient to generate 2 outputs with this dc motor controller. An enclosure of Tape & Reel (TR) is used to package the PMIC. A total of Transistor Driver dc switching's outputs can be handled by it. 4.1V~15V is the operating voltage and supply voltage of the dc control. Qualified to work in a -40°C~85°C TA dc switcher. With this switching controller, you can switch at 200kHz. dc dc regulator can be generalized using Surface Mount. Current Limit, Frequency Control provides dcdc regulator efficient switching control. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. Thare switching converters has a terminal (s) at DUAL . Different dc switching's functions can be applied to 8 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 10V. In addition to "UCC28084", there are other relevant dc to dc converter ics you can find. 8 pins are on switching converter. Switching converter type is specifically Switching Regulator or Controllers. 4.3V should be the minimum input voltage for the dc dc voltage regulator. DC regulator outputs 500mV voltage based on test statistics. A starting point for a project is to note down the dc dc regulator's usual output current, which is 1A. A duty cycle set at 50 % ensures voltage regulator dc to dc reliability during power-on and power-off. A frequency of 1MHz is set for the switching controller.
UCC28084PWR Features
Transistor Driver Outputs
Switching Frequency: 200kHz
Current Limit, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
UCC28084PWR Applications
There are a lot of Texas Instruments UCC28084PWR DC to DC converter applications.
- Packaging
- Flaw detection equipment
- Post equipment
- Smoke exhaust equipment
- Imported equipment
- Pipe bending machines
- Program control systems
- Domestic water pumps
- Digital precision reference circuits
- Adjustable voltage or current linear circuits
