UCC28085D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 650mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Frequency | 1MHz |
| Base Part Number | UCC28085 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 500mV |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 8.3V~15V |
| Control Features | Frequency Control |
| Input Voltage (Min) | 9.3V |
| Topology | Push-Pull |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 50kHz~1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 25ns |
| Fall Time (Typ) | 25 ns |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting |
| Max Duty Cycle | 50 % |
| Duty Cycle | 49% |
| Output Isolation | Isolated |
| Voltage - Start Up | 12.5V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC28085D Overview
In the package 8-SOIC (0.154, 3.90mm Width) , the ac to dc converter is embedded.The AC/DC power converter is available in Tube .In this case, the AC/DC converter is mounted in the way of Surface Mount .It is recommended that the ac dc converter be operated at a temperature of -40°C~85°C TA in order to ensure its performance.Analog IC type SWITCHING CONTROLLER is utilized in this AC DC converter.In this AC to DC transformer, the switching frequency is 50kHz~1MHz .As long as the supply voltage (Vcc/Vdd) is within the range of 8.3V~15V , the AC/DC converter may be used.In total, there are 8 terminations.The ac/dc converter has a total of 8 pins.There are 8 pins in total.Search similar acdc converters based on UCC28085 family members.A total of 2 outputs need to be run.AC to DC converter is contained in Switching Regulator or Controllers .There is 1A output current set.Its output voltage amounts to 500mV .A high efficiency is achieved when operating at a frequency of 1MHz .You are able to read the REACH SVHC standard at: No SVHC .
UCC28085D Features
Packaged with 8-SOIC (0.154, 3.90mm Width)
Switching Frequency at 50kHz~1MHz
With 8 pins
Output Current at 1A
UCC28085D Applications
There are a lot of Texas Instruments UCC28085D AC DC Converters applications.
- Automotive Clusters
- AC?DC USB chargers for Cell Phones
- Standby Power Supplies
- Remotely-controlled appliances
- Battery Chargers
- Automotive Telematics
- Smartphones
- Off--line Battery Charger
- Standby power
- Chargers for cell/cordless phones
