UCC28085DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | UCC28085 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 8.3V~15V |
| Control Features | Frequency Control |
| Input Voltage (Min) | 9.3V |
| Topology | Push-Pull |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 50kHz~1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 25ns |
| Fall Time (Typ) | 25 ns |
| Max Frequency | 1MHz |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting |
| Max Duty Cycle | 50 % |
| Duty Cycle | 49% |
| Output Isolation | Isolated |
| Voltage - Start Up | 12.5V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC28085DR Overview
8-SOIC (0.154, 3.90mm Width) is the package in which the ac to dc converter is embedded.There is a AC/DC power converter of Tape & Reel (TR) available.A AC/DC converter of this type is mounted in the way of Surface Mount .This ac dc converter should be operated at a temperature of -40°C~85°C TA °C so that it can deliver its performance.Analog IC type SWITCHING CONTROLLER is utilized in this AC DC converter.50kHz~1MHz is the switching frequency.Within the range of 8.3V~15V supply voltage (Vcc/Vdd), it can be used.As a result, it has a total of 8 terminations.There are 8 pins on the ac/dc converter.The pins of the ac-dc converter total to 8 .The UCC28085 family can be used to search for similar acdc converters.There are 2 outputs to run.The following ac to dc conversions are contained in Switching Regulator or Controllers .In this AC to DC transformer, the output current is set to 1A .1MHz is the maximum frequency.
UCC28085DR Features
Packaged with 8-SOIC (0.154, 3.90mm Width)
Switching Frequency at 50kHz~1MHz
With 8 pins
Output Current at 1A
UCC28085DR Applications
There are a lot of Texas Instruments UCC28085DR AC DC Converters applications.
- USB type-c v1.2 chargers with optional VDM
- Chargers for cell/cordless phones
- Power Adaptors
- Low-Voltage I/O System Power
- Power adapters for network devices
- Off--line Battery Charger
- Battery chargers for cordless
- Networking
- White goods
- Home Appliance Applications
