UCC28086D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 1MHz |
| Base Part Number | UCC28086 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 500mV |
| Output Type | Transistor Driver |
| Max Output Current | 1A |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 4.1V~15V |
| Control Features | Current Limit, Frequency Control |
| Topology | Half-Bridge, Push-Pull |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz |
| Max Input Voltage | 10V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 25ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 25 ns |
| Nominal Input Voltage | 15V |
| Max Duty Cycle | 50 % |
| Duty Cycle (Max) | 49% |
| Clock Sync | No |
| Output Phases | 1 |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC28086D Overview
The switching controller fits in the 8-SOIC (0.154, 3.90mm Width) package and is ideal for most applications. 2 outputs can be generated with the dc motor controller. PMIC is packaged in a solid enclosure of Tube. It is capable of handling Transistor Driver dc switching's outputs (s). DC control operates at 4.1V~15V volts and has 4.1V~15V supply voltage. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. There is a switch at 200kHz that can be used with this controller. The Surface Mount makes it ideal for general dc dc regulator. In order to control switching efficiently, the dcdc regulator features Current Limit, Frequency Control. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. Switching converters are designed with the terminal (s) at position DUAL . The 8 terminations can be used for a wide range of dc switching. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. It is inputted with a DC switcher's voltage of 10V. Searching "UCC28086" will return other relevant dc to dc converter ics. There are only 8 pins on switching converter. In particular, switching converter belongs to the Switching Regulator or Controllers family. Statistically, the DC regulator outputs 500mV voltage. A starting point for a project is to note down the dc dc regulator's usual output current, which is 1A. Voltage regulator dc to dc is designed to operate at 50 % duty cycle during power-ups and power-downs to ensure reliability. There is 1MHz frequency setting on the switching controller. 15V is the nominal working voltage. Since the dc switcher's maximum input voltage is 10V, the voltage must be regulated accordingly. Output current will not exceed 1A.
UCC28086D Features
Transistor Driver Outputs
Switching Frequency: 200kHz
Current Limit, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
UCC28086D Applications
There are a lot of Texas Instruments UCC28086D DC to DC converter applications.
- Surge protection circuits
- Milling machines
- Overvoltage protection circuits in TV sets
- Serial communication converter
- Radio equipment
- Various precision measuring instruments
- Game consoles
- Printing
- Electric heating, lighting
- Packaging
