UCC28086DR
| Parameters | |
|---|---|
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 1MHz |
| Base Part Number | UCC28086 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 500mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 4.1V~15V |
| Control Features | Current Limit, Frequency Control |
| Input Voltage (Min) | 4.3V |
| Topology | Half-Bridge, Push-Pull |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 25ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 25 ns |
| Max Duty Cycle | 50 % |
| Duty Cycle (Max) | 49% |
| Clock Sync | No |
| Output Phases | 1 |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
UCC28086DR Overview
It comes in a 8-SOIC (0.154, 3.90mm Width) package, so switching controller can be used for most applications. dc motor controller is suitable for 2 output generation. Tape & Reel (TR) solid enclosure protects the pmic. With Transistor Driver dc switching's output (s), it is able to handle it. 4.1V~15V is the supply voltage and the operating voltage of the dc control. Worked in a -40°C~85°C TA dc switcher before. There is a switch at 200kHz that can be used with this controller. dc dc regulator can be generalized using Surface Mount. For efficient switching control, the dcdc regulator features Current Limit, Frequency Control. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. There are a DUAL terminal on the switching converters. An array of 8 terminations of dc switching. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's voltage input is 10V. You can find other relevant dc to dc converter ics by searching "UCC28086". Switching converter has a total of 8 pins. Specially, switching converter corresponds to type Switching Regulator or Controllers. An input voltage of 4.3V is the minimum required for the dc dc voltage regulator. Statistically, the DC regulator outputs 500mV voltage. It's important to remember that the dc dc regulator's normaloutput current is 1A, so you should note it down when starting a new project. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 50 %. Switching controller operates at 1MHz Hz.
UCC28086DR Features
Transistor Driver Outputs
Switching Frequency: 200kHz
Current Limit, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
UCC28086DR Applications
There are a lot of Texas Instruments UCC28086DR DC to DC converter applications.
- Computer rooms
- Special machining machine tools
- Television equipment
- Printing equipment
- Energy management systems
- Digital video recorders
- Medical equipment
- Medical monitoring systems
- Terrestrial set-top boxes
- Electric water heaters
