banner_page

UCC28086PW

8 Terminals 4.1V~15V 8-Pin UCC28086 DC to DC converter ICSWITCHING CONTROLLER 2 Outputs 200kHz Transistor Driver


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-UCC28086PW
  • Package: 8-TSSOP (0.173, 4.40mm Width)
  • Datasheet: -
  • Stock: 677
  • Description: 8 Terminals 4.1V~15V 8-Pin UCC28086 DC to DC converter ICSWITCHING CONTROLLER 2 Outputs 200kHz Transistor Driver (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 week ago)
Mounting Type Surface Mount
Package / Case 8-TSSOP (0.173, 4.40mm Width)
Surface Mount YES
Number of Pins 8
Operating Temperature -40°C~85°C TA
Packaging Tube
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 2 (1 Year)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Switching Regulator or Controllers
Technology BICMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Terminal Pitch 0.65mm
Frequency 1MHz
Base Part Number UCC28086
Function Step-Up/Step-Down
Number of Outputs 2
Output Voltage 500mV
Output Type Transistor Driver
Input Voltage-Nom 10V
Analog IC - Other Type SWITCHING CONTROLLER
Output Configuration Positive
Output Current 1A
Voltage - Supply (Vcc/Vdd) 4.1V~15V
Quiescent Current 1.5mA
Control Features Current Limit, Frequency Control
Input Voltage (Min) 4.3V
Topology Half-Bridge, Push-Pull
Control Mode CURRENT-MODE
Frequency - Switching 200kHz
Control Technique PULSE WIDTH MODULATION
Rise Time 25ns
Synchronous Rectifier Yes
Fall Time (Typ) 25 ns
Max Duty Cycle 50 %
Duty Cycle (Max) 49%
Clock Sync No
Output Phases 1
Height 1.2mm
Length 3mm
Width 4.4mm
Thickness 1mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

UCC28086PW Overview


It comes in the 8-TSSOP (0.173, 4.40mm Width) package, which makes switching controller suitable for most applications. For outputs of 2, this dc motor controller is suitable. Packaging for the pmic consists of Tube solid enclosures. The system can process Transistor Driver dc switching's outputs (s). 4.1V~15V is the supply voltage and the operating voltage of the dc control. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. There is a switch at 200kHz that can be used with this controller. dc dc regulators can be carried out with Surface Mount. DCDC regulator is controlled efficiently by Current Limit, Frequency Control. SWITCHING CONTROLLER analog IC connects the switch converters. The switching converters's terminals (s) are designed at DUAL. A variety of dc switching's functions can be performed on 8 terminations. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 10V is input. In addition to "UCC28086", there are other relevant dc to dc converter ics you can find. In total, switching converter has 8 pins. In particular, switching converter belongs to the Switching Regulator or Controllers family. Input voltage of dc dc voltage regulator should be 4.3V. Statistically, the DC regulator outputs 500mV voltage. You should note down the dc dc regulator's usual output current of 1A when you start a project. A duty cycle set at 50 % ensures voltage regulator dc to dc reliability during power-on and power-off. Switching controller operates at 1MHz Hz. In dormant mode, 1.5mA is used.

UCC28086PW Features


Transistor Driver Outputs
Switching Frequency: 200kHz
Current Limit, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz

UCC28086PW Applications


There are a lot of Texas Instruments UCC28086PW DC to DC converter applications.

  • Television equipment
  • ATMs
  • Printing equipment
  • Planers
  • Cutting machine tools
  • Thermal power
  • Terrestrial set-top boxes
  • Magnetohydrodynamic power
  • Sink circuits
  • Elevator lighting

Write a review

Note: HTML is not translated!
    Bad           Good