UCC2808AD-1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 15 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 10V |
| Frequency | 1MHz |
| Base Part Number | UCC2808 |
| Pin Count | 8 |
| Output Voltage | 500mV |
| Input Voltage-Nom | 10V |
| Number of Channels | 2 |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Nominal Supply Current | 1mA |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 8.3V~15V |
| Control Features | Frequency Control |
| Input Voltage (Min) | 9V |
| Topology | Full-Bridge, Half-Bridge, Push-Pull |
| Control Mode | CURRENT-MODE |
| Input Voltage (Max) | 13V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 25ns |
| Fall Time (Typ) | 25 ns |
| Internal Switch(s) | No |
| Max Duty Cycle | 50 % |
| Duty Cycle | 49% |
| Output Isolation | Isolated |
| Voltage - Start Up | 12.5V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC2808AD-1 Overview
The ac to dc converter is embedded in 8-SOIC (0.154, 3.90mm Width) package.The AC/DC power converter Tube is available for this product.The AC/DC converter is mounted in the way of Surface Mount .This ac dc converter should be operated at a temperature of -55°C~150°C TJ °C so that it can deliver its performance.In this AC DC converter, an analog integrated circuit (IC) of type SWITCHING CONTROLLER is employed.This AC/DC converter is suitable for operation in the range of 8.3V~15V supply voltage (Vcc/Vdd).There are a total of 8 terminations in it.It contains 8 pins.There are 8 pins on the ac-dc converter.The ac dc converters are suitable to mount by Surface Mount .If you select the UCC2808 family, you will be able to search for similar acdc converters.The ac to dc conversions can be found in Switching Regulator or Controllers .Current output is set to 100mA .The voltage output by this AC/DC converter is 500mV .High efficiency can be achieved when AC to DC converters frequency is set to 1MHz .With the aid of a unique technique, it is possible to ensure that the input voltage will be at the maximum value of 13V .SVHC for REACH can be found in the standard No SVHC .At all times, this AC to DC converter should be set to 10V .Currently, there are 2 channels available.
UCC2808AD-1 Features
Packaged with 8-SOIC (0.154, 3.90mm Width)
With 8 pins
Output Current at 100mA
With 2 channels on it
UCC2808AD-1 Applications
There are a lot of Texas Instruments UCC2808AD-1 AC DC Converters applications.
- Linear Adapter Replacements
- Utility meters
- Power adapters for monitors
- Universal input AC/DC adapters (15W - 45W)
- Cleaners
- 3.3V power supplies
- Charger
- AC/DC Adaptors/Chargers for Cell Phones
- Cellular phone chargers
- Replaces linear transformers
