UCC2808ADTR-1
| Parameters | |
|---|---|
| Number of Functions | 1 |
| Supply Voltage | 10V |
| Frequency | 1MHz |
| Base Part Number | UCC2808 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 500mV |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 8.3V~15V |
| Control Features | Frequency Control |
| Input Voltage (Min) | 9V |
| Topology | Full-Bridge, Half-Bridge, Push-Pull |
| Control Mode | CURRENT-MODE |
| Input Voltage (Max) | 13V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 25ns |
| Fall Time (Typ) | 25 ns |
| Internal Switch(s) | No |
| Max Duty Cycle | 50 % |
| Duty Cycle | 49% |
| Output Isolation | Isolated |
| Voltage - Start Up | 12.5V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
UCC2808ADTR-1 Overview
8-SOIC (0.154, 3.90mm Width) is the package in which the ac to dc converter is embedded.The AC/DC power converter Tape & Reel (TR) is available for this product.Surface Mount mounts this AC/DC converter.For the ac dc converter to perform properly, it should be operated at a temperature of -55°C~150°C TJ °C.A SWITCHING CONTROLLER analog integrated circuit is used in this AC DC converter.Vcc/Vdd can be used within the range of 8.3V~15V supply voltage.It has a total of 8 terminations.In this ac/dc converter, there are 8 pins.In this ac-dc converter, there are 8 pins.The ac dc converters are suitable to mount by Surface Mount .A similar acdc converter can be searched by using the UCC2808 family.AC to DC converter is necessary to run 2 outputs.The ac to dc conversions are contained in Switching Regulator or Controllers .There is 100mA output current set.As a result, its output voltage is 500mV .High efficiency can be achieved when AC to DC converters frequency is set to 1MHz .On the basis of a unique technique, it is possible to ensure an input voltage with the maximum value of 13V .This AC to DC converter should always be set to 10V .
UCC2808ADTR-1 Features
Packaged with 8-SOIC (0.154, 3.90mm Width)
With 8 pins
Output Current at 100mA
UCC2808ADTR-1 Applications
There are a lot of Texas Instruments UCC2808ADTR-1 AC DC Converters applications.
- Utility meters
- RCC SMPS
- Power tools
- Vacuum Cleaner
- Low-Voltage I/O System Power
- Air Conditioning
- Rice Cooker
- Z-Wave
- MPS parts
- IoT Applications
