UCC2808ADTR-1G4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 10V |
| Frequency | 1MHz |
| Base Part Number | UCC2808 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 500mV |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 8.3V~15V |
| Control Features | Frequency Control |
| Input Voltage (Min) | 9V |
| Topology | Full-Bridge, Half-Bridge, Push-Pull |
| Control Mode | CURRENT-MODE |
| Input Voltage (Max) | 13V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 25ns |
| Fall Time (Typ) | 25 ns |
| Internal Switch(s) | No |
| Max Duty Cycle | 50 % |
| Duty Cycle | 49% |
| Output Isolation | Isolated |
| Voltage - Start Up | 12.5V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC2808ADTR-1G4 Overview
In the package 8-SOIC (0.154, 3.90mm Width) , the ac to dc converter is embedded.You can get it in AC/DC power converter Tape & Reel (TR) .In this case, the AC/DC converter is mounted in the way of Surface Mount .This ac dc converter should be operated at a temperature of -55°C~150°C TJ °C so that it can deliver its performance.In this AC DC converter, the analog IC type is SWITCHING CONTROLLER .Vcc/Vdd can be used within the range of 8.3V~15V supply voltage.In total, it has 8 terminations.Approximately 8 pins are present on the ac/dc converter.A total of 8 pins are present on the ac-dc converter.The ac dc converters is suitable for mounting by Surface Mount .Similar acdc converters can be found using the UCC2808 family.In this AC to DC transformer, there are 2 outputs to run.The ac to dc conversions can be found in Switching Regulator or Controllers .100mA is set as the output current.There is 500mV voltage output from it.As long as AC to DC converter is operated at frequency 1MHz ,it is capable of attaining high efficiency.It is possible to ensure a maximum value of 13V for the input voltage using a unique technique.You should always set this AC to DC converter to 10V .
UCC2808ADTR-1G4 Features
Packaged with 8-SOIC (0.154, 3.90mm Width)
With 8 pins
Output Current at 100mA
UCC2808ADTR-1G4 Applications
There are a lot of Texas Instruments UCC2808ADTR-1G4 AC DC Converters applications.
- Automotive Telematics
- Adapter/Charger for Cordless Phones
- Home appliances
- White goods
- Off--line Battery Charger
- Battery chargers for cellular phones
- Consumer electronics
- Standby power supplies for IR
- IoT Applications
- Wireless System
