UCC2808ADTR-2
| Parameters | |
|---|---|
| Number of Outputs | 2 |
| Output Voltage | 500mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 4.1V~15V |
| Control Features | Frequency Control |
| Input Voltage (Min) | 4.3V |
| Topology | Push-Pull |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 194kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 25ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 25 ns |
| Max Duty Cycle | 50 % |
| Duty Cycle (Max) | 49% |
| Output Phases | 1 |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 10V |
| Frequency | 1MHz |
| Base Part Number | UCC2808 |
| Function | Step-Up/Step-Down |
UCC2808ADTR-2 Overview
The switching controller fits in the 8-SOIC (0.154, 3.90mm Width) package and is ideal for most applications. There is sufficient capacity to generate switching controller for outputs 2. Tape & Reel (TR) solid enclosure protects the pmic. Transistor Driver dc switching's outputs (s) can be handled by it. DC control operates at 4.1V~15V volts and has 4.1V~15V supply voltage. Suitable for working in an dc switcher that has a -40°C~85°C TA. In this switching controller, the switch can be set to 194kHz. The Surface Mount makes it ideal for general dc dc regulator. To ensure efficient switching, this dcdc regulator features a Frequency Control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. Thare switching converters has a terminal (s) at DUAL . 8 terminations with a variety of function. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. 10V nominal DC switcher's voltage input. Other relevant dc to dc converter ics will be returned if you search "UCC2808". Switching converter has a total of 8 pins. Switching converter is a type of Switching Regulator or Controllers in particular. This dc dc voltage regulator should be powered by a voltage of 4.3V. DC regulator outputs 500mV voltage according to the test statistics. If you are starting a new project, you should note the dc dc regulator's typical output current is 100mA. A duty cycle set at 50 % ensures voltage regulator dc to dc reliability during power-on and power-off. This Surface Mount makes DC switcher suitable for most prototypes and applications. Switching controllers work at 1MHz Hz. The supply voltage should be 10V.
UCC2808ADTR-2 Features
Transistor Driver Outputs
Switching Frequency: 194kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
UCC2808ADTR-2 Applications
There are a lot of Texas Instruments UCC2808ADTR-2 DC to DC converter applications.
- CMM
- Access control systems
- Medical monitoring systems
- Planers
- Wind power
- Packaging
- Overvoltage protection circuits in TV sets
- Plate bending machines
- Wide-range voltage regulation circuits
- Refrigerators of central air conditioners
