UCC2808AN-2G4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 523.190449mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Supply Voltage | 10V |
| Frequency | 1MHz |
| Base Part Number | UCC2808 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 500mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 4.1V~15V |
| Control Features | Frequency Control |
| Input Voltage (Min) | 4.3V |
| Topology | Push-Pull |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 194kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 25ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 25 ns |
| Max Duty Cycle | 50 % |
| Duty Cycle (Max) | 49% |
| Output Phases | 1 |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC2808AN-2G4 Overview
As a result of 8-DIP (0.300, 7.62mm) compact design, the switching controller is compatible with most applications. For 2 outputs, the dc motor controller is appropriate. Tube solid enclosure protects the pmic. Transistor Driver dc switching's outputs (s) can be handled by it. 4.1V~15V is the operating voltage and supply voltage of the dc control. A -40°C~85°C TA dc switcher is not a problem. The switching controller can be switched at 194kHz. The Through Hole allows it to be used for dc dc regulator in general. In order to control switching efficiently, the dcdc regulator features Frequency Control. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. Thare switching converters has a terminal (s) at DUAL . A variety of dc switching's functions can be performed on 8 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. 10V nominal DC switcher's voltage input. Other relevant dc to dc converter ics will be returned if you search "UCC2808". There are a total of 8 pins on switching converter. Particularly, switching converter is a type of Switching Regulator or Controllers. Input voltage of dc dc voltage regulator should be 4.3V. Statistically, the DC regulator outputs 500mV voltage. If you start a project, note down the dc dc regulator's usual output current of 100mA. voltage regulator dc to dcs with a 50 % duty cycle are designed to be reliable when powered on and powered off. In most applications and prototypes, DC switcher's Through Hole makes it suitable. A frequency of 1MHz is set for the switching controller. There must be a voltage supply of 10V volts.
UCC2808AN-2G4 Features
Transistor Driver Outputs
Switching Frequency: 194kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
UCC2808AN-2G4 Applications
There are a lot of Texas Instruments UCC2808AN-2G4 DC to DC converter applications.
- Automation technology
- ATMs
- Sensitive electronic devices
- Die casting equipment
- Textile machinery
- Various precision measuring instruments
- Shearing machines
- Industrial robots
- Imported equipment
- Product burn-in
