UCC2808APW-1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 10V |
| Terminal Pitch | 0.65mm |
| Frequency | 1MHz |
| Base Part Number | UCC2808 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 500mV |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Nominal Supply Current | 1mA |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 8.3V~15V |
| Control Features | Frequency Control |
| Input Voltage (Min) | 9V |
| Topology | Full-Bridge, Half-Bridge, Push-Pull |
| Control Mode | CURRENT-MODE |
| Input Voltage (Max) | 13V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 25ns |
| Fall Time (Typ) | 25 ns |
| Internal Switch(s) | No |
| Max Duty Cycle | 50 % |
| Duty Cycle | 49% |
| Output Isolation | Isolated |
| Voltage - Start Up | 12.5V |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC2808APW-1 Overview
An embedded ac to dc converter is included in 8-TSSOP (0.173, 4.40mm Width) package.The AC/DC power converter Tube is available for this product.There is a mounting point for this AC/DC converter in the way of Surface Mount .For the ac dc converter to perform properly, it should be operated at a temperature of -55°C~150°C TJ °C.The AC DC converter uses a type SWITCHING CONTROLLER analog integrated circuit.This AC/DC converter is designed for use within the range of 8.3V~15V supply voltage (Vcc/Vdd).There have been 8 terminations of this program.There are 8 pins on this ac/dc converter.There are 8 pins on the ac-dc converter.It is suitable for mounting by Surface Mount .Similar acdc converters can be found using the UCC2808 family.The number of outputs to run is 2 .AC to DC converter is included in Switching Regulator or Controllers .The output current is set to 100mA .In this AC to DC transformer, the output voltage is 500mV .When operating at a frequency of 1MHz , AC to DC converter is capable of reaching high efficiency.The input voltage with the maximal value of 13V can be ensured on the basis of unique technique.In all situations, this AC to DC converter should be set to 10V .
UCC2808APW-1 Features
Packaged with 8-TSSOP (0.173, 4.40mm Width)
With 8 pins
Output Current at 100mA
UCC2808APW-1 Applications
There are a lot of Texas Instruments UCC2808APW-1 AC DC Converters applications.
- Standby Power for General Off-Line Applications
- MPS parts
- AC/DC Adaptors/Chargers for Cell Phones
- Appliance Power Supplies
- Standby Power Supplies
- PDAs
- Set Top Boxes (STB)
- Power tools
- Open Frame Switching Power Supply
- Adapter/Charger for Cordless Phones
