UCC2808APW-1G4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tray |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 10V |
| Terminal Pitch | 0.65mm |
| Frequency | 1MHz |
| Base Part Number | UCC2808 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 500mV |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 8.3V~15V |
| Control Features | Frequency Control |
| Input Voltage (Min) | 9V |
| Topology | Full-Bridge, Half-Bridge, Push-Pull |
| Control Mode | CURRENT-MODE |
| Input Voltage (Max) | 13V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 25ns |
| Fall Time (Typ) | 25 ns |
| Internal Switch(s) | No |
| Max Duty Cycle | 50 % |
| Duty Cycle | 49% |
| Output Isolation | Isolated |
| Voltage - Start Up | 12.5V |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC2808APW-1G4 Overview
An embedded ac to dc converter is included in 8-TSSOP (0.173, 4.40mm Width) package.Tray case is available for the ac dc converter.It is mounted in the way of Surface Mount .The ac dc converter should be operated at a temperature of -55°C~150°C TJ °C to deliver its optimal performance.Analog IC type SWITCHING CONTROLLER is utilized in this AC DC converter.This AC/DC converter is suitable for operation in the range of 8.3V~15V supply voltage (Vcc/Vdd).As a result, it has a total of 8 terminations.There are 8 pins on the ac/dc converter.There are a total of 8 pins on the ac-dc converter.The ac dc converters are suitable to mount by Surface Mount .Similar acdc converters can be found using the UCC2808 family.AC to DC converter is necessary to run 2 outputs.The ac to dc conversions are included in Switching Regulator or Controllers .It has been set to 100mA for the output current.The output voltage of the AC/DC converter is 500mV .As long as AC to DC converter is operated at frequency 1MHz ,it is capable of attaining high efficiency.On the basis of a unique technique, the input voltage can be ensured to be 13V .You should always set this AC to DC converter to 10V .
UCC2808APW-1G4 Features
Packaged with 8-TSSOP (0.173, 4.40mm Width)
With 8 pins
Output Current at 100mA
UCC2808APW-1G4 Applications
There are a lot of Texas Instruments UCC2808APW-1G4 AC DC Converters applications.
- Portable Apparatus
- Power Adaptors
- Battery Chargers
- Switching AC-DC Adapter
- AC-DC Output Power Conversion Applications
- WiFi Wireless
- MP3
- MPS parts
- Portable audio
- Power tools
