UCC2808D-2

8 Terminals 4.1V~15V 8-Pin UCC2808 DC to DC converter ICSWITCHING CONTROLLER 2 Outputs 194kHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-UCC2808D-2
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 897
Description: 8 Terminals 4.1V~15V 8-Pin UCC2808 DC to DC converter ICSWITCHING CONTROLLER 2 Outputs 194kHz Transistor Driver (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Weight	72.603129mg
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Switching Regulator or Controllers
Technology	BICMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Supply Voltage	10V
Frequency	1MHz
Base Part Number	UCC2808
Function	Step-Up/Step-Down
Number of Outputs	2
Output Voltage	500mV
Output Type	Transistor Driver
Operating Supply Voltage	15V
Input Voltage-Nom	10V
Analog IC - Other Type	SWITCHING CONTROLLER
Nominal Supply Current	1mA
Output Configuration	Positive
Output Current	500mA
Voltage - Supply (Vcc/Vdd)	4.1V~15V
Control Features	Frequency Control
Input Voltage (Min)	4.3V
Topology	Push-Pull
Control Mode	CURRENT-MODE
Frequency - Switching	194kHz
Control Technique	PULSE WIDTH MODULATION
Rise Time	25ns
Synchronous Rectifier	No
Fall Time (Typ)	25 ns
Max Duty Cycle	50 %
Duty Cycle (Max)	49%
Output Phases	1
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

UCC2808D-2 Overview

It comes in a 8-SOIC (0.154, 3.90mm Width) package, so switching controller can be used for most applications. dc motor controller is suitable for 2 output generation. Packaged in solid enclosures, this pmic has a Tube rating. The program can handle Transistor Driver dc switching's outputs (s). Voltages 4.1V~15V are the dc control's supply voltage and operating voltage, respectively. Suitable for work in a -40°C~85°C TA dc switcher. It can switch at 194kHz. dc dc regulator is made easier with Surface Mount. The dcdc regulator features Frequency Control for efficient switching control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. Thare switching converters has a terminal (s) at DUAL . Various 8 terminations. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. DC switcher's input voltageis set to 10V. UCC2808 can be used to locate other relevant dc to dc converter ics. The switching converter has a total of 8 pins. Switching converter is a type of Switching Regulator or Controllers in particular. Input voltage of dc dc voltage regulator must be 4.3V. According to the test statistics, DC regulator outputs 500mV voltage. The dc dc regulator's usual output current is 500mA, which should be noted down when you start a project. The maximum duty cycle of this voltage regulator dc to dc is set to 50 % to ensure reliability during power-up and power-down. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. 1MHz is the frequency of the switching controller. If the user wishes to run the voltage regulator dc to dc in a circuit safely and reliably, they should apply 15V. There must be a voltage supply of 10V volts. For this the controllers dc, the nominal current supply is 1mA.