UCC2808N-1G4
| Parameters | |
|---|---|
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 8 |
| Weight | 523.190449mg |
| JESD-609 Code | e4 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 10V |
| Frequency | 1MHz |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Input Voltage-Nom | 10V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Current - Output | 500mA |
| Frequency (Max) | 1MHz |
| Voltage - Output | 500mV |
| Input Voltage (Min) | 9.3V |
| Topology | Push-Pull |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 1MHz |
| Input Voltage (Max) | 13V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 25ns |
| Fall Time (Typ) | 25 ns |
| Max Duty Cycle | 50 % |
| Duty Cycle (Max) | 50 % |
| Height | 4.57mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
UCC2808N-1G4 Overview
This ac to dc converter is embedded in package PDIP .In this AC DC converter, an analog integrated circuit (IC) of type SWITCHING CONTROLLER is employed.Switching frequency reaches 1MHz Hz.There are a total of 8 terminations in it.There are 8 pins on this ac/dc converter.The pins of the ac-dc converter total to 8 .Through Hole is a suitable mounting point for the ac dc converters.There are 2 outputs to run.The ac to dc conversions are contained in Switching Regulator or Controllers .High efficiency can be achieved when AC to DC converters frequency is set to 1MHz .On the basis of a unique technique, it is possible to ensure an input voltage with the maximum value of 13V .You should always set this AC to DC converter to 10V .As long as 85°C is set to its maximum value, the AC to DC power converter will run steadily.Minimum working temperature of this isolated switch must not be lower than -40°C .The AC to DC power supply is designed to offer maximum design flexibility because it has a 500mA output current.The output voltage of the AC to DC power converter is 500mV .There is a maximum frequency of 1MHz for this Memory AC to DC converter.
UCC2808N-1G4 Features
Packaged with PDIP
Switching Frequency at 1MHz
With 8 pins
UCC2808N-1G4 Applications
There are a lot of Texas Instruments UCC2808N-1G4 AC DC Converters applications.
- Power tools
- Vacuum Cleaner
- Charger
- IoT Applications
- Battery chargers for cordless
- Switching AC-DC Charger
- Adapters for Handheld Electronics
- Utility meters
- Standby power supplies for VCR
- USB type-c v1.2 chargers with optional VDM
