UCC2813D-2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 10V |
| Frequency | 1MHz |
| Base Part Number | UCC2813 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 1V |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Nominal Supply Current | 500μA |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 8.3V~12V |
| Control Features | Frequency Control |
| Input Voltage (Min) | 9.3V |
| Topology | Boost, Flyback, Forward |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 41ns |
| Supply Current-Max (Isup) | 30mA |
| Fall Time (Typ) | 44 ns |
| Internal Switch(s) | Yes |
| Max Duty Cycle | 100 % |
| Duty Cycle | 99% |
| Output Isolation | Non-Isolated |
| Voltage - Start Up | 12.5V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC2813D-2 Overview
In the 8-SOIC (0.154, 3.90mm Width) package, the ac to dc converter is embedded.The AC/DC power converter type is Tube .In this case, the AC/DC converter is mounted in the way of Surface Mount .To deliver its performance, the ac dc converter should be operated at a temperature of -55°C~150°C TJ .An analog IC of type SWITCHING CONTROLLER is employed in this AC DC converter.Vcc/Vdd can be used within the range of 8.3V~12V supply voltage.In total, there are 8 terminations.In this ac/dc converter, there are 8 pins.The pins of the ac-dc converter total to 8 .The ac dc converters are suitable for mounting by Surface Mount .Based on the UCC2813 family, you can search for similar acdc converters.A total of 1 outputs need to be run.Switching Regulator or Controllers contains the ac to dc conversions.AC to DC converter is set to 200mA for the output current.The voltage output by this AC/DC converter is 1V .This power AC DC is capable of reaching high efficiency when operating at a frequency of 1MHz .You should always set this AC to DC converter to 10V .
UCC2813D-2 Features
Packaged with 8-SOIC (0.154, 3.90mm Width)
With 8 pins
Output Current at 200mA
UCC2813D-2 Applications
There are a lot of Texas Instruments UCC2813D-2 AC DC Converters applications.
- Tablets
- Universal input AC/DC adapters (15W - 45W)
- Remotely-controlled appliances
- MP3
- Wireless System
- Battery chargers for cellular phones
- AC/DC Adaptors/Chargers for PDAs
- Open Frame Switching Power Supply
- Consumer electronics
- Power Adaptors
