UCC2813D-2G4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 10V |
| Frequency | 1MHz |
| Base Part Number | UCC2813 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 5V |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 8.3V~12V |
| Control Features | Frequency Control |
| Input Voltage (Min) | 9.3V |
| Topology | Boost, Flyback, Forward |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 41ns |
| Supply Current-Max (Isup) | 30mA |
| Fall Time (Typ) | 44 ns |
| Internal Switch(s) | Yes |
| Max Duty Cycle | 100 % |
| Duty Cycle | 99% |
| Output Isolation | Non-Isolated |
| Voltage - Start Up | 12.5V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC2813D-2G4 Overview
There is a ac to dc converter embedded in package 8-SOIC (0.154, 3.90mm Width) .There is a AC/DC power converter of Tube available.A AC/DC converter of this type is mounted in the way of Surface Mount .It is necessary to operate the ac dc converter at a temperature of -55°C~150°C TJ °C in order for it to perform properly.An analog IC of type SWITCHING CONTROLLER is employed in this AC DC converter.Vcc/Vdd can be used within the range of 8.3V~12V supply voltage.It has a total of 8 terminations.There are 8 pins on this ac/dc converter.There are 8 pins on the ac-dc converter.There are no problem mounting the ac dc converters by Surface Mount .The UCC2813 family can be used to search for similar acdc converters.AC to DC converter is necessary to run 1 outputs.AC to DC converter is contained in Switching Regulator or Controllers .200mA is set as the output current.The voltage output by this AC/DC converter is 5V .The power AC DC is capable of high efficiency when operated at a frequency of 1MHz .You should always set this AC to DC converter to 10V .
UCC2813D-2G4 Features
Packaged with 8-SOIC (0.154, 3.90mm Width)
With 8 pins
Output Current at 200mA
UCC2813D-2G4 Applications
There are a lot of Texas Instruments UCC2813D-2G4 AC DC Converters applications.
- Digital cameras
- Adapter for ADSL
- Power Adaptors
- Industrial controls
- Consumer electronics
- Set-top boxes
- Auxiliary Power Supply
- Automotive Clusters
- Battery chargers for media tablets
- Portable audio
