UCC2813D-4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 21 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 10V |
| Frequency | 1MHz |
| Base Part Number | UCC2813 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 1V |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Nominal Supply Current | 500μA |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 8.3V~12V |
| Control Features | Frequency Control |
| Input Voltage (Min) | 9.3V |
| Topology | Boost, Flyback, Forward |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 41ns |
| Supply Current-Max (Isup) | 30mA |
| Fall Time (Typ) | 44 ns |
| Internal Switch(s) | Yes |
| Max Duty Cycle | 50 % |
| Duty Cycle | 49% |
| Output Isolation | Non-Isolated |
| Voltage - Start Up | 12.5V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC2813D-4 Overview
There is a ac to dc converter embedded in package 8-SOIC (0.154, 3.90mm Width) .There is a AC/DC power converter of Tube available.This AC/DC converter is mounted in the way of Surface Mount .The ac dc converter needs to be operated at -55°C~150°C TJ °C in order to perform.Analog ICs of type SWITCHING CONTROLLER are used in this AC DC converter.As long as the supply voltage (Vcc/Vdd) is within the range of 8.3V~12V , the AC/DC converter may be used.It has a total of 8 terminations.The ac/dc converter has 8 pins.In this ac-dc converter, there are 8 pins.The ac dc converters are suitable to mount by Surface Mount .It is possible to search for similar acdc converters by using the UCC2813 family.In this AC to DC transformer, there are 1 outputs to run.The ac to dc conversions are included in Switching Regulator or Controllers .We are setting the output current to 1A .There is 1V output voltage from this AC/DC converter.High efficiency can be achieved when AC to DC converters frequency is set to 1MHz .You may read the REACH SVHC standard at No SVHC .Remember that this AC to DC converter should be set to 10V at all times.
UCC2813D-4 Features
Packaged with 8-SOIC (0.154, 3.90mm Width)
With 8 pins
Output Current at 1A
UCC2813D-4 Applications
There are a lot of Texas Instruments UCC2813D-4 AC DC Converters applications.
- Power Adaptors
- Wall switches
- Networking
- LED lights
- Universal Off-Line Power Supplies
- Records
- Appliances
- Battery Chargers
- Portable audio
- Standby power supplies for IR
