UCC2813DTR-0

8 Terminals 6.9V~12V 8-Pin UCC2813 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-UCC2813DTR-0
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 864
Description: 8 Terminals 6.9V~12V 8-Pin UCC2813 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs Transistor Driver (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Weight	72.603129mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Switching Regulator or Controllers
Technology	BICMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Supply Voltage	10V
Frequency	1MHz
Base Part Number	UCC2813
Function	Step-Up, Step-Up/Step-Down
Number of Outputs	1
Output Voltage	1V
Output Type	Transistor Driver
Input Voltage-Nom	10V
Analog IC - Other Type	SWITCHING CONTROLLER
Output Configuration	Positive
Output Current	200mA
Voltage - Supply (Vcc/Vdd)	6.9V~12V
Control Features	Frequency Control
Input Voltage (Min)	7.5V
Topology	Boost, Flyback, Forward Converter
Control Mode	CURRENT-MODE
Control Technique	PULSE WIDTH MODULATION
Rise Time	41ns
Supply Current-Max (Isup)	30mA
Synchronous Rectifier	No
Fall Time (Typ)	44 ns
Max Duty Cycle	100 %
Duty Cycle (Max)	99%
Switching Frequency	1MHz
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

UCC2813DTR-0 Overview

With a 8-SOIC (0.154, 3.90mm Width) package, the switching controller is suitable for a wide range of applications. For outputs of 1, this dc motor controller is suitable. An enclosure of Tape & Reel (TR) is used to package the PMIC. It is capable of handling Transistor Driver dc switching's outputs (s). The supply and operating voltage of the dc control are 6.9V~12V. A -40°C~85°C TA dc switcher is not a problem. dc dc regulator is made easier with Surface Mount. Switching control is made easier with the dcdc regulator's Frequency Control. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. An array of 8 terminations of dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 10V. In addition to "UCC2813", there are other relevant dc to dc converter ics you can find. There are 8 pins on switching converter. In particular, switching converter is a type of Switching Regulator or Controllers. It is recommended that the input voltage of the dc dc voltage regulator be 7.5V. According to the test statistics, DC regulator outputs 1V voltage. In most cases, the dc dc regulator's output current is 200mA. This information should be noted when you begin working with the component. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 100 %. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sA frequency of 1MHz is set for the switching controller. The supply voltage should be 10V. A controller's current should not exceed 30mA. 1MHz is the frequency at which this controller performs well most of the time.