UCC2813DTR-2G4
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 10V |
| Frequency | 1MHz |
| Base Part Number | UCC2813 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 1V |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 8.3V~12V |
| Control Features | Frequency Control |
| Input Voltage (Min) | 9.3V |
| Topology | Boost, Flyback, Forward |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 41ns |
| Supply Current-Max (Isup) | 30mA |
| Fall Time (Typ) | 44 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Max Duty Cycle | 100 % |
| Duty Cycle | 99% |
| Output Isolation | Either |
| Voltage - Start Up | 12.5V |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
UCC2813DTR-2G4 Overview
This ac to dc converter is embedded in package 8-SOIC (0.154, 3.90mm Width) .The AC/DC power converter type is Tape & Reel (TR) .As you can see, this AC/DC converter is mounted in the way of Surface Mount .The ac dc converter should be operated at a temperature of -55°C~150°C TJ °C to deliver its optimal performance.Analog ICs of type SWITCHING CONTROLLER are used in this AC DC converter.The voltage range of the supply can be set to 8.3V~12V (Vcc/Vdd).There are a total of 8 terminations.There are 8 pins on this ac/dc converter.The pins of the ac-dc converter count up to 8 .It is suitable for mounting by Surface Mount .The UCC2813 family can be used to search for similar acdc converters.There are 1 outputs to be run.The following ac to dc conversions are contained in Switching Regulator or Controllers .We are setting the output current to 200mA .There is 1V output voltage from this AC/DC converter.AC to DC converter reaches high efficiency when operated at a frequency of 1MHz .At all times, this AC to DC converter should be set to 10V .
UCC2813DTR-2G4 Features
Packaged with 8-SOIC (0.154, 3.90mm Width)
With 8 pins
Output Current at 200mA
UCC2813DTR-2G4 Applications
There are a lot of Texas Instruments UCC2813DTR-2G4 AC DC Converters applications.
- AC-DC Output Power Conversion Applications
- Consumer electronics
- Set -Top Box (STB) Power Supply
- LED lights
- Wireless System
- Adapter for ADSL
- Standby power supplies for IR
- Standby power
- Appliance Power Supplies
- Chargers for cell/cordless phones
