UCC2813DTR-3G4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 10V |
| Frequency | 1MHz |
| Base Part Number | UCC2813 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 1V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 3.6V~12V |
| Control Features | Frequency Control |
| Input Voltage (Min) | 4V |
| Topology | Boost, Flyback, Forward Converter |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 41ns |
| Supply Current-Max (Isup) | 30mA |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 44 ns |
| Max Duty Cycle | 100 % |
| Duty Cycle (Max) | 99% |
| Switching Frequency | 1MHz |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC2813DTR-3G4 Overview
It comes in a 8-SOIC (0.154, 3.90mm Width) package, so switching controller can be used for most applications. 1 outputs are supported by the dc motor controller. A solid enclosure of Tape & Reel (TR) surrounds pmic. Transistor Driver dc switching's outputs (s) are supported. A 3.6V~12V voltage is supplied to the dc control and used for operating it. Work well in dc switchers with a -40°C~85°C TA. It is suitable for general dc dc regulator when it is set to Surface Mount. Switching control is made easier with the dcdc regulator's Frequency Control. The switch converters are connected to a SWITCHING CONTROLLER analog IC. There are a DUAL terminal on the switching converters. Different dc switching's functions can be applied to 8 terminations. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. There is a DC switcher's nominal voltage of 10V. Searching "UCC2813" will return other relevant dc to dc converter ics. There are 8 pins on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. It is recommended that the dc dc voltage regulator's minimum input voltage be 4V. Test statistics indicate DC regulator outputs 1V voltage. In most cases, the output current of the dc dc regulator will be 200mA, so note that when you start the project. A duty cycle set at 100 % ensures voltage regulator dc to dc reliability during power-on and power-off. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. Switching controllers work at 1MHz Hz. This voltage controller requires a supply voltage of 10V. It is not recommended to supply more current to the controller than 30mA. When this switching controller is running at frequency 1MHz, it can perform well in most cases.
UCC2813DTR-3G4 Features
Transistor Driver Outputs
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 1MHz
Switching Frequency: 1MHz
UCC2813DTR-3G4 Applications
There are a lot of Texas Instruments UCC2813DTR-3G4 DC to DC converter applications.
- Power supplies of electronic gadgets
- Photovoltaic power
- Electric heating, lighting
- Precision electronic equipment
- Special machining machine tools
- Product testing
- Refrigerators of central air conditioners
- ATMs
- Computer application technology
- CMM
