UCC2813DTR-5
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 10V |
| Frequency | 1MHz |
| Base Part Number | UCC2813 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 1V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 3.6V~12V |
| Control Features | Frequency Control |
| Input Voltage (Min) | 4V |
| Topology | Boost, Flyback, Forward Converter |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 41ns |
| Supply Current-Max (Isup) | 30mA |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 44 ns |
| Max Duty Cycle | 50 % |
| Duty Cycle (Max) | 49% |
| Switching Frequency | 1MHz |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC2813DTR-5 Overview
It comes in a 8-SOIC (0.154, 3.90mm Width) package, so switching controller can be used for most applications. The dc motor controller is adquate to generate for 1 outputs. PMIC is packaged in a solid enclosure of Tape & Reel (TR). Transistor Driver dc switching's outputs (s) can be handled by it. The supply and operating voltage of the dc control are 3.6V~12V. Qualified to work in an dc switcher with -40°C~85°C TA. It is suitable for general dc dc regulator when it is set to Surface Mount. Frequency Control is used for efficient switching control in the dcdc regulator. An analog IC SWITCHING CONTROLLER is connected to the switch converters. A switching converters's terminal (s) sits at the DUAL position. There are many different types of terminations for 8. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 10V is input. Searching "UCC2813" will return other relevant dc to dc converter ics. There are a total of 8 pins on switching converter. Switching converter type is specifically Switching Regulator or Controllers. It is recommended that the input voltage of the dc dc voltage regulator be 4V. DC regulator outputs 1V voltage based on test statistics. A starting point for a project is to note down the dc dc regulator's usual output current, which is 200mA. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 50 %. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. Switching controllers work at 1MHz Hz. The supply voltage should be 10V. In order to ensure proper operation, the controller should not receive more current than 30mA. The frequency at which this controller can perform well is 1MHz.
UCC2813DTR-5 Features
Transistor Driver Outputs
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
Switching Frequency: 1MHz
UCC2813DTR-5 Applications
There are a lot of Texas Instruments UCC2813DTR-5 DC to DC converter applications.
- Computer rooms
- Computer-related products
- Driver circuits
- Printing equipment
- USB circuits
- Drilling machines
- Digital video recorders
- Automatic testing equipment
- Direct power supply system
- Nuclear power plants
