UCC2813N-0

8 Terminals 6.9V~12V 8-Pin UCC2813 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-UCC2813N-0
Package: 8-DIP (0.300, 7.62mm)
Datasheet: -
Stock: 210
Description: 8 Terminals 6.9V~12V 8-Pin UCC2813 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs Transistor Driver (Kg)

Details

Tags

Parameters
Rise Time	41ns
Supply Current-Max (Isup)	30mA
Synchronous Rectifier	No
Fall Time (Typ)	44 ns
Max Duty Cycle	100 %
Duty Cycle (Max)	99%
Switching Frequency	1MHz
Height	5.08mm
Length	9.81mm
Width	6.35mm
Thickness	3.9mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Number of Pins	8
Weight	523.190449mg
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Switching Regulator or Controllers
Technology	BICMOS
Terminal Position	DUAL
Supply Voltage	10V
Terminal Pitch	2.54mm
Frequency	1MHz
Base Part Number	UCC2813
Function	Step-Up, Step-Up/Step-Down
Number of Outputs	1
Output Voltage	1V
Output Type	Transistor Driver
Input Voltage-Nom	10V
Analog IC - Other Type	SWITCHING CONTROLLER
Nominal Supply Current	500μA
Output Configuration	Positive
Output Current	200mA
Voltage - Supply (Vcc/Vdd)	6.9V~12V
Control Features	Frequency Control
Input Voltage (Min)	7.5V
Topology	Boost, Flyback, Forward Converter
Control Mode	CURRENT-MODE
Control Technique	PULSE WIDTH MODULATION

UCC2813N-0 Overview

It comes in the 8-DIP (0.300, 7.62mm) package, which makes switching controller suitable for most applications. It is sufficient to generate 1 outputs with this dc motor controller. The pmic is packaged in Tube solid enclosure. Transistor Driver dc switching's outputs (s) can be handled by it. DC control operates at 6.9V~12V volts and has 6.9V~12V supply voltage. Worked in an dc switcher with a -40°C~85°C TA rating. The Through Hole allows it to be used for dc dc regulator in general. Featured in the dcdc regulator is Frequency Control which allows efficient switching control. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. Switching converters are designed with the terminal (s) at position DUAL . A variety of terminations with 8 of dc switching. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 10V. You can find other relevant dc to dc converter ics by searching "UCC2813". There are only 8 pins on switching converter. In particular, switching converter is a type of Switching Regulator or Controllers. It is recommended that the input voltage of the dc dc voltage regulator be 7.5V. DC regulator outputs 1V voltage based on test statistics. In most cases, the output current of the dc dc regulator will be 200mA, so note that when you start the project. A duty cycle set at 100 % ensures voltage regulator dc to dc reliability during power-on and power-off. As DC switcher has a Through Hole, it's suitable for most applications and prototype designs. The switching controller works at a frequency of 1MHz. There must be a voltage supply of 10V volts. There should be 30mA current exceeding 30mA supplied to the controller. Switching voltage regulators' nominal current supply is 500μA. This controller performs best at a frequency of 1MHz.