UCC2813N-1
| Parameters | |
|---|---|
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 1V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Nominal Supply Current | 500μA |
| Output Configuration | Positive |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 7.4V~12V |
| Control Features | Frequency Control |
| Topology | Boost, Flyback, Forward Converter |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 41ns |
| Supply Current-Max (Isup) | 30mA |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 44 ns |
| Max Duty Cycle | 50 % |
| Duty Cycle (Max) | 49% |
| Switching Frequency | 1MHz |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 523.190449mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Supply Voltage | 10V |
| Terminal Pitch | 2.54mm |
| Frequency | 1MHz |
| Base Part Number | UCC2813 |
UCC2813N-1 Overview
This switching controller fits most application requirements since it is packaged in a 8-DIP (0.300, 7.62mm) package. There is enough capacity in the dc motor controller to generate the output for the 1 input. A solid enclosure of Tube surrounds pmic. The program can handle Transistor Driver dc switching's outputs (s). dc control's supply and operating voltages are 7.4V~12V. Worked in an dc switcher with a -40°C~85°C TA rating. The Through Hole value makes it suitable for general dc dc regulator. For efficient switching control, the dcdc regulator features Frequency Control. A SWITCHING CONTROLLER analog IC is connected to the switch converters. A switching converters's terminal (s) sits at the DUAL position. Various 8 terminations. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 10V. A search for "UCC2813" will reveal other relevant dc to dc converter ics. There are only 8 pins on switching converter. Switching converter is a special type of Switching Regulator or Controllers. The test statistics indicate that DC regulator outputs a voltage of 1V. A starting point for a project is to note down the dc dc regulator's usual output current, which is 200mA. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 50 %. In most applications and prototypes, DC switcher's Through Hole makes it suitable. Switching controller operates at 1MHz Hz. There must be a voltage supply of 10V volts. It is not recommended to supply more current to the controller than 30mA. nominal current supply for this the controllers dc is 500μA. At 1MHz, this controller performs best.
UCC2813N-1 Features
Transistor Driver Outputs
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
Switching Frequency: 1MHz
UCC2813N-1 Applications
There are a lot of Texas Instruments UCC2813N-1 DC to DC converter applications.
- Refrigerators of central air conditioners
- Window air conditioners
- SMT equipment
- Industrial controllers
- Sensitive electronic devices
- ATMs
- Electric heating, lighting
- Power supplies of electronic gadgets
- Network technology
- Computer-related products
